• Messages corrompus, Linky en mode standard

    Téléinfo teleinfo
    16
    0 Votes
    16 Posts
    4k Views
    G
    @Nicolas-Bernaerts Ca pourrait si je n'avais que le soucis avec teleinfo-linky mais je l'ai aussi avec Linky Exporter. EDIT Je n'utilise pas le port série du RPi, je suis en USB. Donc pas de console sur le port série. Dans minicom je vois les données corrompus, donc ce n'est pas un soucis du programmes qui lit les données du linky. Au bout d'un moment les lignes HHPHC A , MOTDETAT 000000 B Se répètent pendant un certain temps plus ou moins aléatoire. Si je débranches le câble venant du linky la LED rouge reste allumée faiblement. Même soucis sur un Orange Pi Zero LTS et sur un Raspberry Pi 3 A+
  • 0 Votes
    4 Posts
    2k Views
    Daniel PiqueeD
    @jple Bonjour, j'ai eu un problème similaire, en supprimant la librairie SoftSerial et en utilisant le serial de l'esp8266 tout s'est mis a marché parfaitement... Merci à Charles
  • 0 Votes
    4 Posts
    2k Views
    localhost61L
    @arthurlutz-0 Il a déjà marché ce montage? Sans mise en forme du signal en sortie de l'optocoupleur par un mosfet les fronts ne sont pas assez raides pour attaquer l'ESP.
  • Carte WeMos Teleinfo

    Wemos Teleinfo wemos teleinfo tasmota
    54
    1
    0 Votes
    54 Posts
    8k Views
    M
    @Charles De rien. Le but d'un forum communautaire c'est aussi de partager des retours d'expériences.
  • 0 Votes
    1 Posts
    621 Views
    No one has replied
  • Push Jeedom sur connexion SSL

    Remora jeedom ssl teleinfo teleinformation
    1
    0 Votes
    1 Posts
    610 Views
    No one has replied
  • Utilisation du PiTInfo avec un nodemcu

    PiTInfo teleinfo pitinfo esp8266
    1
    0 Votes
    1 Posts
    810 Views
    No one has replied
  • 1 Votes
    8 Posts
    9k Views
    Glummy_64G
    Bonjour, l'ajout de la resistance de 10ko en pull up a fonctionné aussi chez moi. Tout refonctionne sans problèmes.
  • Nouvelle version du Dongle µTeleinfo

    MicroTéléinfo dongle tinfo usb teleinfo micro
    46
    0 Votes
    46 Posts
    42k Views
    V
    Bonjour, Si je veux conserver mon Schneider Wiser EM5 en plus du dongle, comment raccorder les deux appareils à la téléinfo ?
  • 0 Votes
    4 Posts
    4k Views
    J
    @Charles here it is, thanks for your help, let me know if you spot something in the data: $ udevadm info --attribute-walk -n /dev/ttyUSB0 Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/ttyUSB0/tty/ttyUSB0': KERNEL=="ttyUSB0" SUBSYSTEM=="tty" DRIVER=="" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/ttyUSB0': KERNELS=="ttyUSB0" SUBSYSTEMS=="usb-serial" DRIVERS=="ftdi_sio" ATTRS{port_number}=="0" ATTRS{latency_timer}=="1" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0': KERNELS=="1-1.2:1.0" SUBSYSTEMS=="usb" DRIVERS=="ftdi_sio" ATTRS{bInterfaceClass}=="ff" ATTRS{bInterfaceSubClass}=="ff" ATTRS{bInterfaceProtocol}=="ff" ATTRS{bNumEndpoints}=="02" ATTRS{authorized}=="1" ATTRS{supports_autosuspend}=="1" ATTRS{bAlternateSetting}==" 0" ATTRS{bInterfaceNumber}=="00" ATTRS{interface}=="Papouch SB485S (SC)" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2': KERNELS=="1-1.2" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{devpath}=="1.2" ATTRS{idVendor}=="0403" ATTRS{speed}=="12" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="8" ATTRS{busnum}=="1" ATTRS{devnum}=="4" ATTRS{configuration}=="" ATTRS{bMaxPower}=="100mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="80" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="0" ATTRS{bcdDevice}=="0600" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{serial}=="PPTPLYYD" ATTRS{version}==" 2.00" ATTRS{urbnum}=="36003915" ATTRS{ltm_capable}=="no" ATTRS{manufacturer}=="Papouch s.r.o." ATTRS{removable}=="removable" ATTRS{idProduct}=="6001" ATTRS{bDeviceClass}=="00" ATTRS{product}=="Papouch SB485S (SC)" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1': KERNELS=="1-1" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="02" ATTRS{devpath}=="1" ATTRS{idVendor}=="0424" ATTRS{speed}=="480" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{busnum}=="1" ATTRS{devnum}=="2" ATTRS{configuration}=="" ATTRS{bMaxPower}=="2mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="5" ATTRS{bcdDevice}=="0200" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{version}==" 2.00" ATTRS{urbnum}=="54" ATTRS{ltm_capable}=="no" ATTRS{removable}=="unknown" ATTRS{idProduct}=="9514" ATTRS{bDeviceClass}=="09" looking at parent device '/devices/platform/soc/3f980000.usb/usb1': KERNELS=="usb1" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="01" ATTRS{devpath}=="0" ATTRS{idVendor}=="1d6b" ATTRS{speed}=="480" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{authorized_default}=="1" ATTRS{busnum}=="1" ATTRS{devnum}=="1" ATTRS{configuration}=="" ATTRS{bMaxPower}=="0mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="1" ATTRS{interface_authorized_default}=="1" ATTRS{bcdDevice}=="0404" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{serial}=="3f980000.usb" ATTRS{version}==" 2.00" ATTRS{urbnum}=="25" ATTRS{ltm_capable}=="no" ATTRS{manufacturer}=="Linux 4.4.27-v7+ dwc_otg_hcd" ATTRS{removable}=="unknown" ATTRS{idProduct}=="0002" ATTRS{bDeviceClass}=="09" ATTRS{product}=="DWC OTG Controller" looking at parent device '/devices/platform/soc/3f980000.usb': KERNELS=="3f980000.usb" SUBSYSTEMS=="platform" DRIVERS=="dwc_otg" ATTRS{hnp}=="HstNegScs = 0x0" ATTRS{srp}=="SesReqScs = 0x1" ATTRS{regvalue}=="invalid offset" ATTRS{hsic_connect}=="HSIC Connect = 0x1" ATTRS{guid}=="GUID = 0x2708a000" ATTRS{mode}=="Mode = 0x1" ATTRS{srpcapable}=="SRPCapable = 0x1" ATTRS{regdump}=="Register Dump" ATTRS{gpvndctl}=="GPVNDCTL = 0x00000000" ATTRS{ggpio}=="GGPIO = 0x00000000" ATTRS{hprt0}=="HPRT0 = 0x00001405" ATTRS{wr_reg_test}=="Time to write GNPTXFSIZ reg 10000000 times: 1060 msecs (106 jiffies)" ATTRS{driver_override}=="(null)" ATTRS{hcd_frrem}=="HCD Dump Frame Remaining" ATTRS{mode_ch_tim_en}=="Mode Change Ready Timer Enable = 0x0" ATTRS{gnptxfsiz}=="GNPTXFSIZ = 0x01000306" ATTRS{remote_wakeup}=="Remote Wakeup Sig = 0 Enabled = 0 LPM Remote Wakeup = 0" ATTRS{busconnected}=="Bus Connected = 0x1" ATTRS{hcddump}=="HCD Dump" ATTRS{gotgctl}=="GOTGCTL = 0x001c0001" ATTRS{spramdump}=="SPRAM Dump" ATTRS{grxfsiz}=="GRXFSIZ = 0x00000306" ATTRS{gsnpsid}=="GSNPSID = 0x4f54280a" ATTRS{gusbcfg}=="GUSBCFG = 0x20001700" ATTRS{hptxfsiz}=="HPTXFSIZ = 0x02000406" ATTRS{devspeed}=="Device Speed = 0x0" ATTRS{fr_interval}=="Frame Interval = 0x1d4c" ATTRS{rem_wakeup_pwrdn}=="" ATTRS{bussuspend}=="Bus Suspend = 0x0" ATTRS{buspower}=="Bus Power = 0x1" ATTRS{hnpcapable}=="HNPCapable = 0x1" ATTRS{rd_reg_test}=="Time to read GNPTXFSIZ reg 10000000 times: 2140 msecs (214 jiffies)" ATTRS{enumspeed}=="Device Enumeration Speed = 0x1" ATTRS{inv_sel_hsic}=="Invert Select HSIC = 0x0" ATTRS{regoffset}=="0xffffffff" looking at parent device '/devices/platform/soc': KERNELS=="soc" SUBSYSTEMS=="platform" DRIVERS=="" ATTRS{driver_override}=="(null)" looking at parent device '/devices/platform': KERNELS=="platform" SUBSYSTEMS=="" DRIVERS=="" $ udevadm info --attribute-walk -n /dev/ttyUSB1 Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/ttyUSB1/tty/ttyUSB1': KERNEL=="ttyUSB1" SUBSYSTEM=="tty" DRIVER=="" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/ttyUSB1': KERNELS=="ttyUSB1" SUBSYSTEMS=="usb-serial" DRIVERS=="ch341-uart" ATTRS{port_number}=="0" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0': KERNELS=="1-1.4:1.0" SUBSYSTEMS=="usb" DRIVERS=="ch341" ATTRS{bInterfaceClass}=="ff" ATTRS{bInterfaceSubClass}=="01" ATTRS{bInterfaceProtocol}=="02" ATTRS{bNumEndpoints}=="03" ATTRS{authorized}=="1" ATTRS{supports_autosuspend}=="1" ATTRS{bAlternateSetting}==" 0" ATTRS{bInterfaceNumber}=="00" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4': KERNELS=="1-1.4" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{devpath}=="1.4" ATTRS{idVendor}=="1a86" ATTRS{speed}=="12" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="8" ATTRS{busnum}=="1" ATTRS{devnum}=="5" ATTRS{configuration}=="" ATTRS{bMaxPower}=="96mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="80" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="0" ATTRS{bcdDevice}=="0254" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{version}==" 1.10" ATTRS{urbnum}=="7492" ATTRS{ltm_capable}=="no" ATTRS{removable}=="removable" ATTRS{idProduct}=="7523" ATTRS{bDeviceClass}=="ff" ATTRS{product}=="USB2.0-Serial" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1': KERNELS=="1-1" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="02" ATTRS{devpath}=="1" ATTRS{idVendor}=="0424" ATTRS{speed}=="480" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{busnum}=="1" ATTRS{devnum}=="2" ATTRS{configuration}=="" ATTRS{bMaxPower}=="2mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="5" ATTRS{bcdDevice}=="0200" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{version}==" 2.00" ATTRS{urbnum}=="54" ATTRS{ltm_capable}=="no" ATTRS{removable}=="unknown" ATTRS{idProduct}=="9514" ATTRS{bDeviceClass}=="09" looking at parent device '/devices/platform/soc/3f980000.usb/usb1': KERNELS=="usb1" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="01" ATTRS{devpath}=="0" ATTRS{idVendor}=="1d6b" ATTRS{speed}=="480" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{authorized_default}=="1" ATTRS{busnum}=="1" ATTRS{devnum}=="1" ATTRS{configuration}=="" ATTRS{bMaxPower}=="0mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="1" ATTRS{interface_authorized_default}=="1" ATTRS{bcdDevice}=="0404" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{serial}=="3f980000.usb" ATTRS{version}==" 2.00" ATTRS{urbnum}=="25" ATTRS{ltm_capable}=="no" ATTRS{manufacturer}=="Linux 4.4.27-v7+ dwc_otg_hcd" ATTRS{removable}=="unknown" ATTRS{idProduct}=="0002" ATTRS{bDeviceClass}=="09" ATTRS{product}=="DWC OTG Controller" looking at parent device '/devices/platform/soc/3f980000.usb': KERNELS=="3f980000.usb" SUBSYSTEMS=="platform" DRIVERS=="dwc_otg" ATTRS{hnp}=="HstNegScs = 0x0" ATTRS{srp}=="SesReqScs = 0x1" ATTRS{regvalue}=="invalid offset" ATTRS{hsic_connect}=="HSIC Connect = 0x1" ATTRS{guid}=="GUID = 0x2708a000" ATTRS{mode}=="Mode = 0x1" ATTRS{srpcapable}=="SRPCapable = 0x1" ATTRS{regdump}=="Register Dump" ATTRS{gpvndctl}=="GPVNDCTL = 0x00000000" ATTRS{ggpio}=="GGPIO = 0x00000000" ATTRS{hprt0}=="HPRT0 = 0x00001405" ATTRS{wr_reg_test}=="Time to write GNPTXFSIZ reg 10000000 times: 870 msecs (87 jiffies)" ATTRS{driver_override}=="(null)" ATTRS{hcd_frrem}=="HCD Dump Frame Remaining" ATTRS{mode_ch_tim_en}=="Mode Change Ready Timer Enable = 0x0" ATTRS{gnptxfsiz}=="GNPTXFSIZ = 0x01000306" ATTRS{remote_wakeup}=="Remote Wakeup Sig = 0 Enabled = 0 LPM Remote Wakeup = 0" ATTRS{busconnected}=="Bus Connected = 0x1" ATTRS{hcddump}=="HCD Dump" ATTRS{gotgctl}=="GOTGCTL = 0x001c0001" ATTRS{spramdump}=="SPRAM Dump" ATTRS{grxfsiz}=="GRXFSIZ = 0x00000306" ATTRS{gsnpsid}=="GSNPSID = 0x4f54280a" ATTRS{gusbcfg}=="GUSBCFG = 0x20001700" ATTRS{hptxfsiz}=="HPTXFSIZ = 0x02000406" ATTRS{devspeed}=="Device Speed = 0x0" ATTRS{fr_interval}=="Frame Interval = 0x1d4c" ATTRS{rem_wakeup_pwrdn}=="" ATTRS{bussuspend}=="Bus Suspend = 0x0" ATTRS{buspower}=="Bus Power = 0x1" ATTRS{hnpcapable}=="HNPCapable = 0x1" ATTRS{rd_reg_test}=="Time to read GNPTXFSIZ reg 10000000 times: 1890 msecs (189 jiffies)" ATTRS{enumspeed}=="Device Enumeration Speed = 0x1" ATTRS{inv_sel_hsic}=="Invert Select HSIC = 0x0" ATTRS{regoffset}=="0xffffffff" looking at parent device '/devices/platform/soc': KERNELS=="soc" SUBSYSTEMS=="platform" DRIVERS=="" ATTRS{driver_override}=="(null)" looking at parent device '/devices/platform': KERNELS=="platform" SUBSYSTEMS=="" DRIVERS=="" $ udevadm info --attribute-walk -n /dev/ttyUSB2 Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/ttyUSB2/tty/ttyUSB2': KERNEL=="ttyUSB2" SUBSYSTEM=="tty" DRIVER=="" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/ttyUSB2': KERNELS=="ttyUSB2" SUBSYSTEMS=="usb-serial" DRIVERS=="ch341-uart" ATTRS{port_number}=="0" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0': KERNELS=="1-1.5:1.0" SUBSYSTEMS=="usb" DRIVERS=="ch341" ATTRS{bInterfaceClass}=="ff" ATTRS{bInterfaceSubClass}=="01" ATTRS{bInterfaceProtocol}=="02" ATTRS{bNumEndpoints}=="03" ATTRS{authorized}=="1" ATTRS{supports_autosuspend}=="1" ATTRS{bAlternateSetting}==" 0" ATTRS{bInterfaceNumber}=="00" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5': KERNELS=="1-1.5" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="00" ATTRS{devpath}=="1.5" ATTRS{idVendor}=="1a86" ATTRS{speed}=="12" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="8" ATTRS{busnum}=="1" ATTRS{devnum}=="6" ATTRS{configuration}=="" ATTRS{bMaxPower}=="96mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="80" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="0" ATTRS{bcdDevice}=="0254" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{version}==" 1.10" ATTRS{urbnum}=="900734" ATTRS{ltm_capable}=="no" ATTRS{removable}=="removable" ATTRS{idProduct}=="7523" ATTRS{bDeviceClass}=="ff" ATTRS{product}=="USB2.0-Serial" looking at parent device '/devices/platform/soc/3f980000.usb/usb1/1-1': KERNELS=="1-1" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="02" ATTRS{devpath}=="1" ATTRS{idVendor}=="0424" ATTRS{speed}=="480" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{busnum}=="1" ATTRS{devnum}=="2" ATTRS{configuration}=="" ATTRS{bMaxPower}=="2mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="5" ATTRS{bcdDevice}=="0200" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{version}==" 2.00" ATTRS{urbnum}=="54" ATTRS{ltm_capable}=="no" ATTRS{removable}=="unknown" ATTRS{idProduct}=="9514" ATTRS{bDeviceClass}=="09" looking at parent device '/devices/platform/soc/3f980000.usb/usb1': KERNELS=="usb1" SUBSYSTEMS=="usb" DRIVERS=="usb" ATTRS{bDeviceSubClass}=="00" ATTRS{bDeviceProtocol}=="01" ATTRS{devpath}=="0" ATTRS{idVendor}=="1d6b" ATTRS{speed}=="480" ATTRS{bNumInterfaces}==" 1" ATTRS{bConfigurationValue}=="1" ATTRS{bMaxPacketSize0}=="64" ATTRS{authorized_default}=="1" ATTRS{busnum}=="1" ATTRS{devnum}=="1" ATTRS{configuration}=="" ATTRS{bMaxPower}=="0mA" ATTRS{authorized}=="1" ATTRS{bmAttributes}=="e0" ATTRS{bNumConfigurations}=="1" ATTRS{maxchild}=="1" ATTRS{interface_authorized_default}=="1" ATTRS{bcdDevice}=="0404" ATTRS{avoid_reset_quirk}=="0" ATTRS{quirks}=="0x0" ATTRS{serial}=="3f980000.usb" ATTRS{version}==" 2.00" ATTRS{urbnum}=="25" ATTRS{ltm_capable}=="no" ATTRS{manufacturer}=="Linux 4.4.27-v7+ dwc_otg_hcd" ATTRS{removable}=="unknown" ATTRS{idProduct}=="0002" ATTRS{bDeviceClass}=="09" ATTRS{product}=="DWC OTG Controller" looking at parent device '/devices/platform/soc/3f980000.usb': KERNELS=="3f980000.usb" SUBSYSTEMS=="platform" DRIVERS=="dwc_otg" ATTRS{hnp}=="HstNegScs = 0x0" ATTRS{srp}=="SesReqScs = 0x1" ATTRS{regvalue}=="invalid offset" ATTRS{hsic_connect}=="HSIC Connect = 0x1" ATTRS{guid}=="GUID = 0x2708a000" ATTRS{mode}=="Mode = 0x1" ATTRS{srpcapable}=="SRPCapable = 0x1" ATTRS{regdump}=="Register Dump" ATTRS{gpvndctl}=="GPVNDCTL = 0x00000000" ATTRS{ggpio}=="GGPIO = 0x00000000" ATTRS{hprt0}=="HPRT0 = 0x00001005" ATTRS{wr_reg_test}=="Time to write GNPTXFSIZ reg 10000000 times: 680 msecs (68 jiffies)" ATTRS{driver_override}=="(null)" ATTRS{hcd_frrem}=="HCD Dump Frame Remaining" ATTRS{mode_ch_tim_en}=="Mode Change Ready Timer Enable = 0x0" ATTRS{gnptxfsiz}=="GNPTXFSIZ = 0x01000306" ATTRS{remote_wakeup}=="Remote Wakeup Sig = 0 Enabled = 0 LPM Remote Wakeup = 0" ATTRS{busconnected}=="Bus Connected = 0x1" ATTRS{hcddump}=="HCD Dump" ATTRS{gotgctl}=="GOTGCTL = 0x001c0001" ATTRS{spramdump}=="SPRAM Dump" ATTRS{grxfsiz}=="GRXFSIZ = 0x00000306" ATTRS{gsnpsid}=="GSNPSID = 0x4f54280a" ATTRS{gusbcfg}=="GUSBCFG = 0x20001700" ATTRS{hptxfsiz}=="HPTXFSIZ = 0x02000406" ATTRS{devspeed}=="Device Speed = 0x0" ATTRS{fr_interval}=="Frame Interval = 0x1d4c" ATTRS{rem_wakeup_pwrdn}=="" ATTRS{bussuspend}=="Bus Suspend = 0x0" ATTRS{buspower}=="Bus Power = 0x1" ATTRS{hnpcapable}=="HNPCapable = 0x1" ATTRS{rd_reg_test}=="Time to read GNPTXFSIZ reg 10000000 times: 1700 msecs (170 jiffies)" ATTRS{enumspeed}=="Device Enumeration Speed = 0x1" ATTRS{inv_sel_hsic}=="Invert Select HSIC = 0x0" ATTRS{regoffset}=="0xffffffff" looking at parent device '/devices/platform/soc': KERNELS=="soc" SUBSYSTEMS=="platform" DRIVERS=="" ATTRS{driver_override}=="(null)" looking at parent device '/devices/platform': KERNELS=="platform" SUBSYSTEMS=="" DRIVERS==""
  • Téléinfo semble erronée

    Remora remora teleinfo
    71
    0 Votes
    71 Posts
    160k Views
    F
    Je viens de tester avec cette dernière version et plus de reboot lors des commande fp=XXXXXXX. Je laisse en test encore une semaine avant d'intégrer tout ça dans openhab.
  • [Wifinfo] Valeurs erronées après quelques temps

    WifInfo api teleinfo json
    24
    0 Votes
    24 Posts
    36k Views
    M
    @Charles Je viens de recompiler avec la nouvelle version de la librairie (vraiment une bonne idée l'OTA via l'interface). Je regarde sur quelques jours.
  • 0 Votes
    40 Posts
    45k Views
    T
    je me répond a moi même, C'a y est ca marche, il faut mettre : stty -F /dev/ttyAMA0 9600 sane evenp parenb cs7 -crtscts
  • Plus d'informations sur WifInfo

    WifInfo wifi teleinfo web
    4
    0 Votes
    4 Posts
    3k Views
    S
    cool, ouais je sais pour ma culture ça me ferait pas de mal bootstrap. Mais pour mon site web je vais essayer de faire le plus léger possible (HTML/css uniquement si je peux). Knacss c'est un micro framework css léger vraiment pratique et bien pensé, tu verras..j'aime bien Alsacréations pour le webdesign.. http://knacss.com/ avec brackets+qq extensions ça déboite bien je trouve
  • 0 Votes
    1 Posts
    2k Views
    No one has replied
  • 0 Votes
    1 Posts
    4k Views
    No one has replied
  • Table Téléinfo mysql…

    Téléinfo teleinfo mysql
    2
    0 Votes
    2 Posts
    4k Views
    CharlesC
    Bonjour, Effectivement toutes les informations ne sont pas pertinentes à intégrer en base de données. C’est comme les index, en fonction de ce que l’on souhaite faire il est possible de ne les mettre que toutes les heures par exemple. Néanmoins maintenant certains site comme emoncms ou autres sont assez optimisés pour ce type de traitements et supportent sans problème l’envoi en temps réel. Après par exemple le site peut moyenner les valeurs d’entrées (ex tt les 5 minutes)
  • configuration MySQL

    Téléinfo broadcast emoncms teleinfo mysql
    16
    0 Votes
    16 Posts
    7k Views
    E
    @charles merci! Je me suis servi de cette aide sur mysql pour avoir des commandes en lignes. Ca marche! https://doc.ubuntu-fr.org/mysql
  • tlf_check_frame() no correct frame '(null)'

    Téléinfo broadcast teleinfo
    3
    0 Votes
    3 Posts
    2k Views
    N
    Super, c’est du support du tonnerre J’ai ajouté le champ ‘PPOT’ et l’intégration se fait maintenant bien. Merci beaucoup Il y a bien toujours l’erreur “tlf_check_frame() no correct frame ‘(null)'”, mais c’est pas grave tant que çà envoie et stocke (MySQL/Emoncms)…