Tasmota sensor 12.1.1.2 avec linky mode Standard --> Libteleinfo checkline error checksum...

Charles

@Samquad le paramètre limit n'existe plus il a été remplacé par skip mais ça ne change pas la taille de la trame, ça évite juste d'envoyer une trame toutes les secondes par exemple.

Pour n'envoyer que les paramètres qui ont changés (donc trame plus courte) la commande c'est energyconfig changed

Pour le flow node red c'est peut être l'affichage de la trame en debug dans node red qui tronque parce qu'il n'y a rien dans le flow juste une noeud MQTT et un noeud de fonction que j'ai décrit plus haut.

Samquad

@Charles
le Noeud MQTT in de node red reçoit bien la trame en entier quand l'option energyconfig changed est activée.

trame reçue avec option changed

Quand energyconfig full est activé la trame est tronquée par le noeud MQTT in

--> La limitation semble provenir du noeud MQTT in dans Node red.

Si je colle la trame full dans le noeud inject je la visualise en entier dans un noeud debug msg.payload

Pour compiler mes données pour domoticz j'ai besoin de recevoir les données qui changent mais aussi les autres sur lesquels j'ai des conditions.

Est-ce que tu peux m'aider à créer un Rule dans tamsota pour envoyer une trame mqt: tele/Teleinfo/SENSORperso limitée à ces données:

SINSTS puissance apparante soutirée
EASF01 index comptage soutiré
IRMS1 courant instantané
EAIT index compteur production
SINSTI puissance apparente injectée

Je ne sais pas comment écrire cette rule mais je pense que c'est peut-etre possible et que ça pourrait servir à beaucoup d'entre nous

merci

Charles

@Samquad comme déjà indiqué les rules c'est galère je n'utilise plus les règles

Regarde l'exemple en Berry dans la doc du Wemos Tic qui poste sur Emoncms, tu peux utiliser exactement le même principe a peut prêt.

PS : ta trame me parait bien corrompue, tu utilises bien la version 12 de Tasmota?

Samquad

@Charles

OK, j'abandonne l'idée des rules, je vais regarder la doc en Berry mais j'ai peur que ça dépasse mes compétences techniques.

Je pense que l'utilisation de node red c'est théoriquement plus simple.

Problème : il ne fonctionne pas à cause (je pense) d'un problème de la trame émise MQT --> Est-ce qu'on pourrait s'assurer que Tasmota fonctionne correctement?

J'utilise Tasmota V12.2.0.2 et j'ai des erreurs dans la console en permanence.

Pour reprendre depuis le début:
Mon compteur est configuré en mode standard, le Pitinfo V1.4 est tout neuf

Connecté sur un RPI3 : le test picocom reçoit les trames TIC. elles semblent être conformes (voir les trames un peu plus haut dans le post)
Connecté sur wemos mini d1 tasmota , les données s'affichent

La trame MQT est envoyée mais est-ce qu'elle est conforme?

Entre chaque trame MQT je constate beaucoup d'erreurs dans la console
--> est-ce que c'est normale toutes ces erreurs?

19:47:01.520 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44620995,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606767,"IRMS1":10,"URMS1":233,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCASN":5502,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341244,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":2387,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF01":36844561,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233}}
19:47:01.752 LibTeleinfo::checkLine Err checksum 0x45 != 0x46
19:47:01.754 LibTeleinfo::checkLine Err checksum 0x2C != 0x24
19:47:01.756 LibTeleinfo::checkLine Err checksum 0x22 != 0x25
19:47:01.762 LibTeleinfo::checkLine Err checksum 0x43 != 0x29
19:47:02.003 LibTeleinfo::checkLine Err checksum 0x27 != 0x2A
19:47:02.009 LibTeleinfo::checkLine Err checksum 0x26 != 0x30
19:47:02.016 LibTeleinfo::checkLine Err checksum 0x41 != 0x42
19:47:02.258 LibTeleinfo::checkLine Err checksum 0x5A != 0x5C
19:47:02.260 LibTeleinfo::checkLine Err checksum 0x54 != 0x55
19:47:02.264 LibTeleinfo::checkLine Err checksum 0x57 != 0x58
19:47:02.265 LibTeleinfo::checkLine Err checksum 0x39 != 0x3C
19:47:02.269 LibTeleinfo::checkLine Err checksum 0x40 != 0x45
19:47:02.503 LibTeleinfo::checkLine Err checksum 0x29 != 0x2F
19:47:02.505 LibTeleinfo::checkLine Err checksum 0x49 != 0x4A
19:47:02.506 LibTeleinfo::checkLine Err checksum 0x54 != 0x32
19:47:02.508 LibTeleinfo::checkLine Err checksum 0x52 != 0x4E
19:47:02.753 LibTeleinfo: _recv_idx = 128/128 buffer overflow
19:47:02.755 LibTeleinfo::checkLine Err checksum 0x34 != 0x39
19:47:02.757 LibTeleinfo::checkLine Err checksum 0x48 != 0x4A
19:47:03.003 LibTeleinfo::checkLine Err checksum 0x47 != 0x4A
19:47:03.007 LibTeleinfo::checkLine Err checksum 0x38 != 0x26
19:47:03.008 LibTeleinfo::checkLine Err checksum 0x24 != 0x27
19:47:03.014 LibTeleinfo::checkLine Err checksum 0x3E != 0x30
19:47:03.260 LibTeleinfo::checkLine Err checksum 0x3E != 0x50
19:47:03.503 LibTeleinfo::checkLine Err checksum 0x53 != 0x58
19:47:03.506 LibTeleinfo::checkLine Err checksum 0x34 != 0x4E
19:47:03.510 LibTeleinfo::checkLine Err checksum 0x3D != 0x2F
19:47:03.514 LibTeleinfo::checkLine Err checksum 0x30 != 0x35
19:47:03.753 LibTeleinfo::checkLine Err checksum 0x3C != 0x31
19:47:03.755 LibTeleinfo::checkLine Err checksum 0x4D != 0x4E
19:47:04.006 LibTeleinfo::checkLine Err checksum 0x4C != 0x50
19:47:04.008 LibTeleinfo::checkLine Err checksum 0x21 != 0x24
19:47:04.505 LibTeleinfo::checkLine Err checksum 0x59 != 0x5C
19:47:04.507 LibTeleinfo::checkLine Err checksum 0x59 != 0x5B
19:47:04.515 LibTeleinfo::checkLine Err checksum 0x2A != 0x32
19:47:04.517 LibTeleinfo::checkLine Err checksum 0x4D != 0x4E
19:47:04.757 LibTeleinfo::checkLine Err checksum 0x46 != 0x4A
19:47:04.759 LibTeleinfo::checkLine Err checksum 0x33 != 0x35
19:47:05.019 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44620997,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606767,"IRMS1":10,"URMS1":233,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341247,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":2379,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF01":36844563,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233,"CCASN":"04402DCB@RN0H220129190000"}}
19:47:05.258 LibTeleinfo::checkLine Err checksum 0x2D != 0x2F
19:47:05.260 LibTeleinfo::checkLine Err checksum 0x37 != 0x25
19:47:05.266 LibTeleinfo::checkLine Err checksum 0x2F != 0x30
19:47:05.509 LibTeleinfo::checkLine Err checksum 0x58 != 0x5A
19:47:05.752 LibTeleinfo::checkLine Err checksum 0x4F != 0x30
19:47:05.754 LibTeleinfo::checkLine Err checksum 0x48 != 0x4D
19:47:05.756 LibTeleinfo::checkLine Err checksum 0x58 != 0x32
19:47:05.760 LibTeleinfo::checkLine Err checksum 0x3F != 0x45
19:47:05.761 LibTeleinfo::checkLine Err checksum 0x23 != 0x26
19:47:06.003 LibTeleinfo::checkLine Err checksum 0x54 != 0x4A
19:47:06.257 LibTeleinfo::checkLine Err checksum 0x3C != 0x09
19:47:06.259 LibTeleinfo::checkLine Err checksum 0x3B != 0x3C
19:47:06.261 LibTeleinfo::checkLine Err checksum 0x2F != 0x4B
19:47:06.503 LibTeleinfo::checkLine Err checksum 0x4D != 0x50
19:47:06.508 LibTeleinfo::checkLine Err checksum 0x26 != 0x30
19:47:06.516 LibTeleinfo::checkLine Err checksum 0x24 != 0x4B
19:47:06.518 LibTeleinfo::checkLine Err checksum 0x21 != 0x22
19:47:06.757 LibTeleinfo::checkLine Err checksum 0x22 != 0x30
19:47:06.759 LibTeleinfo::checkLine Err checksum 0x21 != 0x22
19:47:06.765 LibTeleinfo::checkLine Err checksum 0x31 != 0x58
19:47:07.005 LibTeleinfo::checkLine Err checksum 0x32 != 0x4E
19:47:07.009 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
19:47:07.010 LibTeleinfo::checkLine Err checksum 0x2C != 0x2F
19:47:07.012 LibTeleinfo::checkLine Err checksum 0x4D != 0x35
19:47:07.506 LibTeleinfo::checkLine Err checksum 0x20 != 0x30
19:47:07.759 LibTeleinfo::checkLine Err checksum 0x32 != 0x22
19:47:07.761 LibTeleinfo::checkLine Err checksum 0x39 != 0x3A
19:47:08.006 LibTeleinfo::checkLine Err checksum 0x20 != 0x5C
19:47:08.009 LibTeleinfo::checkLine Err checksum 0x46 != 0x4D
19:47:08.011 LibTeleinfo::checkLine Err checksum 0x57 != 0x58
19:47:08.014 LibTeleinfo::checkLine Err checksum 0x2C != 0x32
19:47:08.016 LibTeleinfo::checkLine Err checksum 0x4B != 0x4E
19:47:08.258 LibTeleinfo::checkLine Err checksum 0x29 != 0x26
19:47:08.260 LibTeleinfo::checkLine Err checksum 0x2A != 0x2F
19:47:08.264 LibTeleinfo::checkLine Err checksum 0x4A != 0x3F
19:47:08.266 LibTeleinfo::checkLine Err checksum 0x3A != 0x3C
19:47:08.503 LibTeleinfo::checkLine Err checksum 0x24 != 0x26
19:47:08.519 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44620998,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606767,"IRMS1":8,"URMS1":234,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341247,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":1929,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF01":36844565,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233,"CCASN":5502}}
19:47:08.755 LibTeleinfo::checkLine Err checksum 0x35 != 0x26
19:47:09.002 LibTeleinfo::checkLine Err checksum 0x4A != 0x4C
19:47:09.008 LibTeleinfo::checkLine Err checksum 0x2A != 0x30
19:47:09.010 LibTeleinfo::checkLine Err checksum 0x25 != 0x24
19:47:09.012 LibTeleinfo::checkLine Err checksum 0x20 != 0x22
19:47:09.258 LibTeleinfo::checkLine Err checksum 0x2C != 0x58
19:47:09.262 LibTeleinfo::checkLine Err checksum 0x32 != 0x4E
19:47:09.266 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
19:47:09.267 LibTeleinfo::checkLine Err checksum 0x2B != 0x2F
19:47:09.503 LibTeleinfo::checkLine Err checksum 0x4A != 0x35
19:47:09.507 LibTeleinfo::checkLine Err checksum 0x41 != 0x42
19:47:09.756 LibTeleinfo::checkLine Err checksum 0x47 != 0x4E
19:47:10.002 LibTeleinfo::checkLine Err checksum 0x4D != 0x50
19:47:10.009 LibTeleinfo::checkLine Err checksum 0x3C != 0x28
19:47:10.011 LibTeleinfo::checkLine Err checksum 0x27 != 0x29
19:47:10.016 LibTeleinfo::checkLine Err checksum 0x4E != 0x32
19:47:10.018 LibTeleinfo::checkLine Err checksum 0x5F != 0x22
19:47:14.515 LibTeleinfo::checkLine Err checksum 0x24 != 0x28
19:47:14.762 LibTeleinfo::checkLine Err checksum 0x28 != 0x50
19:47:15.005 LibTeleinfo::checkLine Err checksum 0x32 != 0x58
19:47:15.009 LibTeleinfo::checkLine Err checksum 0x31 != 0x4E
19:47:15.256 LibTeleinfo::checkLine Err checksum 0x21 != 0x26
19:47:15.258 LibTeleinfo::checkLine Err checksum 0x2E != 0x2F
19:47:15.260 LibTeleinfo::checkLine Err checksum 0x4D != 0x35
19:47:15.514 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44620998,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606768,"IRMS1":8,"URMS1":236,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341250,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":1937,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF01":36844566,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233,"CCASN":5502}}
19:47:15.753 LibTeleinfo::checkLine Err checksum 0x2C != 0x24
19:47:15.755 LibTeleinfo::checkLine Err checksum 0x22 != 0x25
19:47:15.760 LibTeleinfo::checkLine Err checksum 0x4C != 0x30
19:47:16.011 LibTeleinfo::checkLine Err checksum 0x59 != 0x5C
19:47:16.013 LibTeleinfo::checkLine Err checksum 0x53 != 0x56
19:47:16.257 LibTeleinfo::checkLine Err checksum 0x31 != 0x32
19:47:16.259 LibTeleinfo::checkLine Err checksum 0x3F != 0x45
19:47:16.263 LibTeleinfo::checkLine Err checksum 0x2A != 0x2F
19:47:16.265 LibTeleinfo::checkLine Err checksum 0x47 != 0x4A
19:47:16.504 LibTeleinfo::checkLine Err checksum 0x5C != 0x42
19:47:16.753 LibTeleinfo::checkLine Err checksum 0x4B != 0x4F
19:47:17.001 LibTeleinfo::checkLine Err checksum 0x42 != 0x30
19:47:17.256 LibTeleinfo::checkLine Err checksum 0x3D != 0x5A
19:47:17.267 LibTeleinfo::checkLine Err checksum 0x46 != 0x4D
19:47:17.272 LibTeleinfo::checkLine Err checksum 0x2B != 0x32
19:47:17.502 LibTeleinfo::checkLine Err checksum 0x4B != 0x4E
19:47:17.504 LibTeleinfo::checkLine Err checksum 0x29 != 0x26
19:47:17.508 LibTeleinfo::checkLine Err checksum 0x47 != 0x4A
19:47:17.510 LibTeleinfo::checkLine Err checksum 0x31 != 0x35
19:47:17.772 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44621002,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606768,"IRMS1":8,"URMS1":235,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341252,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":1921,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF01":36844569,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233,"CCASN":5502}}
19:47:18.004 LibTeleinfo::checkLine Err checksum 0x23 != 0x30
19:47:18.257 LibTeleinfo::checkLine Err checksum 0x40 != 0x29
19:47:18.265 LibTeleinfo::checkLine Err checksum 0x30 != 0x22
19:47:18.267 LibTeleinfo::checkLine Err checksum 0x21 != 0x23
19:47:18.274 LibTeleinfo::checkLine Err checksum 0x31 != 0x23
19:47:18.276 LibTeleinfo::checkLine Err checksum 0x33 != 0x36
19:47:18.278 LibTeleinfo::checkLine Err checksum 0x43 != 0x44
19:47:18.508 LibTeleinfo::checkLine Err checksum 0x56 != 0x58
19:47:18.514 LibTeleinfo::checkLine Err checksum 0x47 != 0x4E
19:47:18.515 LibTeleinfo::checkLine Err checksum 0x3F != 0x45
19:47:18.517 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
19:47:18.753 LibTeleinfo::checkLine Err checksum 0x52 != 0x4A
19:47:19.260 LibTeleinfo::checkLine Err checksum 0x35 != 0x26
19:47:19.267 LibTeleinfo::checkLine Err checksum 0x33 != 0x22
19:47:19.269 LibTeleinfo::checkLine Err checksum 0x38 != 0x3A
19:47:19.513 LibTeleinfo::checkLine Err checksum 0x36 != 0x4D
19:47:24.769 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44621005,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606768,"IRMS1":10,"URMS1":233,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341255,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":2383,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF01":36844572,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233,"CCASN":5502}}
19:47:24.773 LibTeleinfo::checkLine Err checksum 0x36 != 0x39
19:47:25.004 LibTeleinfo::checkLine Err checksum 0x37 != 0x25
19:47:25.005 LibTeleinfo::checkLine Err checksum 0x23 != 0x26
19:47:25.011 LibTeleinfo::checkLine Err checksum 0x45 != 0x2A
19:47:25.257 LibTeleinfo::checkLine Err checksum 0x5E != 0x22
19:47:25.503 LibTeleinfo::checkLine Err checksum 0x4A != 0x59
19:47:25.504 LibTeleinfo::checkLine Err checksum 0x49 != 0x4D
19:47:25.506 LibTeleinfo::checkLine Err checksum 0x25 != 0x32
19:47:25.510 LibTeleinfo::checkLine Err checksum 0x3F != 0x45
19:47:25.753 LibTeleinfo::checkLine Err checksum 0x52 != 0x4A
19:47:26.003 LibTeleinfo: _recv_idx = 128/128 buffer overflow
19:47:26.004 LibTeleinfo::checkLine Err checksum 0x57 != 0x09
19:47:26.007 LibTeleinfo::checkLine Err checksum 0x2C != 0x4A
19:47:26.257 LibTeleinfo::checkLine Err checksum 0x4D != 0x50
19:47:26.263 LibTeleinfo::checkLine Err checksum 0x3D != 0x27
19:47:26.264 LibTeleinfo::checkLine Err checksum 0x24 != 0x28
19:47:26.270 LibTeleinfo::checkLine Err checksum 0x57 != 0x30
19:47:26.505 LibTeleinfo::checkLine Err checksum 0x29 != 0x50
19:47:26.513 LibTeleinfo::checkLine Err checksum 0x33 != 0x58
19:47:26.755 LibTeleinfo::checkLine Err checksum 0x31 != 0x4E
19:47:26.759 LibTeleinfo::checkLine Err checksum 0x21 != 0x26
19:47:26.761 LibTeleinfo::checkLine Err checksum 0x2E != 0x2F
19:47:26.763 LibTeleinfo::checkLine Err checksum 0x4C != 0x35
19:47:27.259 LibTeleinfo::checkLine Err checksum 0x2D != 0x24
19:47:27.260 LibTeleinfo::checkLine Err checksum 0x22 != 0x25
19:47:27.504 LibTeleinfo::checkLine Err checksum 0x4C != 0x30
19:47:27.752 LibTeleinfo::checkLine Err checksum 0x2F != 0x42
19:47:27.753 LibTeleinfo::checkLine Err checksum 0x59 != 0x5C
19:47:27.755 LibTeleinfo::checkLine Err checksum 0x57 != 0x5A
19:47:27.759 LibTeleinfo::checkLine Err checksum 0x31 != 0x32
19:47:28.002 LibTeleinfo::checkLine Err checksum 0x3F != 0x45
19:47:28.006 LibTeleinfo::checkLine Err checksum 0x2A != 0x2F
19:47:28.008 LibTeleinfo::checkLine Err checksum 0x46 != 0x4A
19:47:28.256 LibTeleinfo::checkLine Err checksum 0x5C != 0x42
19:47:28.270 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44621007,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606769,"IRMS1":10,"URMS1":233,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341257,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":2377,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF01":36844574,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233,"CCASN":5502}}
19:47:28.502 LibTeleinfo::checkLine Err checksum 0x2D != 0x30
19:47:28.504 LibTeleinfo::checkLine Err checksum 0x40 != 0x30
19:47:28.512 LibTeleinfo::checkLine Err checksum 0x32 != 0x22
19:47:28.757 LibTeleinfo::checkLine Err checksum 0x58 != 0x5A
19:47:29.003 LibTeleinfo::checkLine Err checksum 0x46 != 0x4D
19:47:29.005 LibTeleinfo::checkLine Err checksum 0x58 != 0x32
19:47:29.009 LibTeleinfo::checkLine Err checksum 0x3F != 0x45
19:47:29.010 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
19:47:29.257 LibTeleinfo::checkLine Err checksum 0x53 != 0x4A
19:47:29.753 LibTeleinfo::checkLine Err checksum 0x21 != 0x24
19:47:29.759 LibTeleinfo::checkLine Err checksum 0x3F != 0x28
19:47:29.764 LibTeleinfo::checkLine Err checksum 0x48 != 0x30
19:47:30.005 LibTeleinfo::checkLine Err checksum 0x3C != 0x24
19:47:30.007 LibTeleinfo::checkLine Err checksum 0x2F != 0x30
19:47:30.012 LibTeleinfo::checkLine Err checksum 0x4D != 0x58
19:47:30.258 LibTeleinfo::checkLine Err checksum 0x47 != 0x4E
19:47:30.262 LibTeleinfo::checkLine Err checksum 0x45 != 0x2F
19:47:30.266 LibTeleinfo::checkLine Err checksum 0x30 != 0x35
19:47:30.504 LibTeleinfo::checkLine Err checksum 0x4D != 0x4E
19:47:30.754 LibTeleinfo::checkLine Err checksum 0x2F != 0x31
19:47:30.756 LibTeleinfo::checkLine Err checksum 0x37 != 0x25
19:47:30.758 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
19:47:31.004 LibTeleinfo::checkLine Err checksum 0x2F != 0x30
19:47:31.011 LibTeleinfo::checkLine Err checksum 0x58 != 0x5A
19:47:31.260 LibTeleinfo::checkLine Err checksum 0x5F != 0x4D
19:47:31.266 LibTeleinfo::checkLine Err checksum 0x2B != 0x32
19:47:31.268 LibTeleinfo::checkLine Err checksum 0x47 != 0x4E
19:47:31.270 LibTeleinfo::checkLine Err checksum 0x44 != 0x45
19:47:31.502 LibTeleinfo::checkLine Err checksum 0x46 != 0x2F
19:47:31.508 LibTeleinfo::checkLine Err checksum 0x4D != 0x4E
19:47:31.510 LibTeleinfo::checkLine Err checksum 0x25 != 0x26
19:47:31.766 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF02":36496683,"EASF03":0,"EASF07":0,"EASF08":0,"EASD02":44621009,"EASD03":0,"EASD04":0,"ERQ3":787836,"ERQ4":4606769,"IRMS1":11,"URMS1":233,"PREF":12,"PCOUP":12,"SMAXSN-1":6036,"SINSTI":0,"CCAIN":0,"STGE":"003A4101","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":73341259,"EASF04":0,"EASF05":0,"EASF09":0,"EASF10":0,"EASD01":28720250,"EAIT":6778086,"ERQ1":4306558,"SINSTS":2538,"SMAXSN":7581,"SMAXIN":2405,"CCAIN-1":0,"EASF06":0,"ERQ2":117434,"CCASN-1":4176,"SMAXIN-1":1209,"UMOY1":233,"CCASN":5502,"EASF01":36844576}}
19:47:31.770 LibTeleinfo::checkLine Err checksum 0x3C != 0x09
19:47:31.772 LibTeleinfo::checkLine Err checksum 0x3B != 0x3C
19:47:32.003 LibTeleinfo::checkLine Err checksum 0x25 != 0x4E
19:47:32.005 LibTeleinfo::checkLine Err checksum 0x4D != 0x50
19:47:32.011 LibTeleinfo::checkLine Err checksum 0x26 != 0x30
19:47:32.257 LibTeleinfo::checkLine Err checksum 0x4C != 0x33
19:47:32.265 LibTeleinfo::checkLine Err checksum 0x22 != 0x30
19:47:32.267 LibTeleinfo::checkLine Err checksum 0x23 != 0x24
19:47:32.503 LibTeleinfo::checkLine Err checksum 0x31 != 0x58
19:47:32.504 LibTeleinfo::checkLine Err checksum 0x38 != 0x3C
19:47:32.506 LibTeleinfo::checkLine Err checksum 0x31 != 0x32
19:47:32.508 LibTeleinfo::checkLine Err checksum 0x43 != 0x45
19:47:32.512 LibTeleinfo::checkLine Err checksum 0x2A != 0x2F
19:47:32.753 LibTeleinfo::checkLine Err checksum 0x47 != 0x4A
19:47:32.754 LibTeleinfo::checkLine Err checksum 0x2B != 0x26
19:47:33.005 LibTeleinfo::checkLine Err checksum 0x54 != 0x50
19:47:33.257 LibTeleinfo::checkLine Err checksum 0x20 != 0x24
19:47:33.263 LibTeleinfo::checkLine Err checksum 0x48 != 0x30
19:47:33.270 LibTeleinfo::checkLine Err checksum 0x2D != 0x22
19:47:33.505 LibTeleinfo::checkLine Err checksum 0x50 != 0x24
19:47:33.506 LibTeleinfo::checkLine Err checksum 0x2F != 0x30
19:47:33.514 LibTeleinfo::checkLine Err checksum 0x56 != 0x58
19:47:33.755 LibTeleinfo::checkLine Err checksum 0x47 != 0x4E
19:47:33.757 LibTeleinfo::checkLine Err checksum 0x44 != 0x45
19:47:33.759 LibTeleinfo::checkLine Err checksum 0x45 != 0x2F

J'espère que ces infos peuvent t'aider à cibler le problème.
Est-ce que c'est le contenu des données TIC qui provoque ces erreurs?
Mon compteur est mono / tarif base/ avec revente de surplus solaire (injection)

Charles

@Samquad compliqué puisque le module semble fonctionner, mais sous tasmota tu as trop d'erreurs.

Tu ne veux pas essayer juste la base :

juste le PI Tinfo, Ton ESP32 et le programme passthru check que les trames sont correctes à l'oeil
Ensuite si ça marche, même montage mais avec Tasmota dernière version

Déjà avec la dernière version les étiquettes LTARF et NGTF sont trimmées ce qui doit réduire la taille

PS : question con pourquoi tu n'as pas pris un shield téléinfo Wemos, ça solutionne déjà tout problème potentiel de connectique entre le WeMos et le PITinfo ?

Samquad

@Charles

J'ai fait les essais.
ESP32 avec pitinfo et passthru check voici les captures d'écrans
je ne sais pas si c'est normal mais c'est impossible de copier coller les trames dans un bloc note.

Même montage avec Tasmota dernière version (toujours sur ESP32)
Les valeurs s'affichent sur la page principale, mais j'ai des erreurs checksum et buffer overflow comme sur le wemos tasmota

19:17:33.182 RSL: SENSOR = {"TIC":{"EAST":73562674,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625402,"IRMS1":18,"URMS1":232,"PREF":12,"PCOUP":12,"SINSTS":4235,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768300,"EASF06":0,"EASF01":37065991,"CCASN":3496}}
19:17:33.400 LibTeleinfo::checkLine Err checksum 0x37 != 0x30
19:17:33.405 LibTeleinfo::checkLine Err checksum 0x41 != 0x2A
19:17:33.656 LibTeleinfo::checkLine Err checksum 0x25 != 0x26
19:17:33.900 LibTeleinfo::checkLine Err checksum 0x53 != 0x56
19:17:33.904 LibTeleinfo::checkLine Err checksum 0x4A != 0x4C
19:17:33.906 LibTeleinfo::checkLine Err checksum 0x4D != 0x44
19:17:33.909 LibTeleinfo::checkLine Err checksum 0x22 != 0x24
19:17:34.149 LibTeleinfo::checkLine Err checksum 0x40 != 0x44
19:17:34.154 LibTeleinfo::checkLine Err checksum 0x53 != 0x30
19:17:34.409 RSL: SENSOR = {"TIC":{"EAST":73562679,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625402,"IRMS1":18,"URMS1":232,"PREF":12,"PCOUP":12,"SINSTS":4235,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768306,"EASF06":0,"EASF01":37065996,"CCASN":3496}}
19:17:34.679 LibTeleinfo::checkLine Err checksum 0x23 != 0x26
19:17:34.680 LibTeleinfo::checkLine Err checksum 0x3B != 0x28
19:17:34.687 LibTeleinfo::checkLine Err checksum 0x40 != 0x48
19:17:34.689 LibTeleinfo::checkLine Err checksum 0x21 != 0x22
19:17:34.929 LibTeleinfo::checkLine Err checksum 0x4C != 0x23
19:17:34.930 LibTeleinfo::checkLine Err checksum 0x55 != 0x56
19:17:34.937 LibTeleinfo::checkLine Err checksum 0x21 != 0x5B
19:17:35.178 LibTeleinfo::checkLine Err checksum 0x4E != 0x29
19:17:35.182 LibTeleinfo::checkLine Err checksum 0x5F != 0x23
19:17:35.184 LibTeleinfo::checkLine Err checksum 0x20 != 0x24
19:17:35.186 LibTeleinfo::checkLine Err checksum 0x37 != 0x2A
19:17:35.707 RSL: SENSOR = {"TIC":{"EAST":73562679,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625402,"IRMS1":18,"URMS1":231,"PREF":12,"PCOUP":12,"SINSTS":4226,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768306,"EASF06":0,"EASF01":37065996,"CCASN":3496}}
19:17:35.771 LibTeleinfo::checkLine Err checksum 0x38 != 0x24
19:17:35.775 LibTeleinfo::checkLine Err checksum 0x40 != 0x29
19:17:35.777 LibTeleinfo::checkLine Err checksum 0x29 != 0x2A
19:17:35.889 LibTeleinfo::checkLine Err checksum 0x5B != 0x22
19:17:35.891 LibTeleinfo::checkLine Err checksum 0x20 != 0x23
19:17:35.892 LibTeleinfo::checkLine Err checksum 0x23 != 0x26
19:17:36.139 LibTeleinfo::checkLine Err checksum 0x42 != 0x43
19:17:36.141 LibTeleinfo::checkLine Err checksum 0x55 != 0x3C
19:17:36.143 LibTeleinfo::checkLine Err checksum 0x48 != 0x4C
19:17:36.388 LibTeleinfo::checkLine Err checksum 0x4E != 0x44
19:17:36.392 LibTeleinfo::checkLine Err checksum 0x5E != 0x44
19:17:36.395 LibTeleinfo::checkLine Err checksum 0x5F != 0x3C
19:17:36.638 LibTeleinfo::checkLine Err checksum 0x24 != 0x26
19:17:36.641 LibTeleinfo::checkLine Err checksum 0x41 != 0x42
19:17:36.652 RSL: SENSOR = {"TIC":{"EAST":73562681,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625402,"IRMS1":18,"URMS1":231,"PREF":12,"PCOUP":12,"SINSTS":4226,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768306,"EASF06":0,"EASF01":37065996,"CCASN":3496}}
19:17:36.715 LibTeleinfo::checkLine Err checksum 0x33 != 0x36
19:17:36.925 LibTeleinfo::checkLine Err checksum 0x40 != 0x30
19:17:36.931 LibTeleinfo::checkLine Err checksum 0x32 != 0x22
19:17:37.175 LibTeleinfo::checkLine Err checksum 0x4C != 0x4F
19:17:37.183 LibTeleinfo::checkLine Err checksum 0x42 != 0x43
19:17:37.427 LibTeleinfo::checkLine Err checksum 0x4B != 0x4C
19:17:37.429 LibTeleinfo::checkLine Err checksum 0x26 != 0x29
19:17:37.434 LibTeleinfo::checkLine Err checksum 0x42 != 0x44
19:17:37.666 LibTeleinfo::checkLine Err checksum 0x25 != 0x2A
19:17:37.988 RSL: SENSOR = {"TIC":{"EAST":73562681,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625403,"IRMS1":18,"URMS1":231,"PREF":12,"PCOUP":12,"SINSTS":4226,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768309,"EASF06":0,"EASF01":37065999,"CCASN":"03486DCCASN0H220202183000"}}
19:17:38.051 LibTeleinfo::checkLine Err checksum 0x45 != 0x46
19:17:38.054 LibTeleinfo::checkLine Err checksum 0x28 != 0x24
19:17:38.058 LibTeleinfo::checkLine Err checksum 0x42 != 0x29
19:17:38.060 LibTeleinfo::checkLine Err checksum 0x28 != 0x2A
19:17:38.071 LibTeleinfo::checkLine Err checksum 0x5F != 0x22
19:17:38.441 LibTeleinfo::checkLine Err checksum 0x31 != 0x43
19:17:38.444 LibTeleinfo::checkLine Err checksum 0x2D != 0x4C
19:17:38.682 LibTeleinfo::checkLine Err checksum 0x44 != 0x29
19:17:38.686 LibTeleinfo::checkLine Err checksum 0x20 != 0x23
19:17:38.687 LibTeleinfo::checkLine Err checksum 0x5F != 0x24
19:17:38.689 LibTeleinfo::checkLine Err checksum 0x44 != 0x2A
19:17:38.701 LibTeleinfo::checkLine Err checksum 0x3E != 0x3F
19:17:38.934 LibTeleinfo::checkLine Err checksum 0x41 != 0x42
19:17:38.949 RSL: SENSOR = {"TIC":{"EAST":73562683,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625403,"IRMS1":18,"URMS1":231,"PREF":12,"PCOUP":12,"SINSTS":4226,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768310,"EASF06":0,"EASF01":37066000,"CCASN":3496}}
19:17:39.168 LibTeleinfo::checkLine Err checksum 0x37 != 0x26
19:17:39.170 LibTeleinfo::checkLine Err checksum 0x25 != 0x27
19:17:39.421 LibTeleinfo::checkLine Err checksum 0x35 != 0x22
19:17:39.422 LibTeleinfo::checkLine Err checksum 0x48 != 0x4B
19:17:39.427 LibTeleinfo::checkLine Err checksum 0x4F != 0x50
19:17:39.670 LibTeleinfo::checkLine Err checksum 0x5C != 0x43
19:17:39.674 LibTeleinfo::checkLine Err checksum 0x5D != 0x4C
19:17:39.920 LibTeleinfo::checkLine Err checksum 0x3C != 0x23
19:17:39.924 LibTeleinfo::checkLine Err checksum 0x41 != 0x44
19:17:40.176 RSL: SENSOR = {"TIC":{"EAST":73562683,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625403,"IRMS1":18,"URMS1":232,"PREF":12,"PCOUP":12,"SINSTS":4226,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768311,"EASF06":0,"EASF01":37066001,"CCASN":3496}}
19:17:40.241 LibTeleinfo::checkLine Err checksum 0x2F != 0x50
19:17:40.401 LibTeleinfo::checkLine Err checksum 0x22 != 0x24
19:17:40.404 LibTeleinfo::checkLine Err checksum 0x43 != 0x29
19:17:40.405 LibTeleinfo::checkLine Err checksum 0x27 != 0x2A
19:17:40.649 LibTeleinfo::checkLine Err checksum 0x58 != 0x22
19:17:40.656 LibTeleinfo::checkLine Err checksum 0x54 != 0x37
19:17:40.657 LibTeleinfo::checkLine Err checksum 0x41 != 0x42
19:17:40.659 LibTeleinfo::checkLine Err checksum 0x5B != 0x5C
19:17:40.902 LibTeleinfo::checkLine Err checksum 0x57 != 0x5B
19:17:40.904 LibTeleinfo::checkLine Err checksum 0x39 != 0x3C
19:17:40.908 LibTeleinfo::checkLine Err checksum 0x3F != 0x44
19:17:40.912 LibTeleinfo::checkLine Err checksum 0x21 != 0x24
19:17:41.149 LibTeleinfo::checkLine Err checksum 0x49 != 0x32
19:17:41.152 LibTeleinfo::checkLine Err checksum 0x55 != 0x42
19:17:41.409 RSL: SENSOR = {"TIC":{"EAST":73562687,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625403,"IRMS1":18,"URMS1":232,"PREF":12,"PCOUP":12,"SINSTS":4228,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768311,"EASF06":0,"EASF01":37066001,"CCASN":3496}}
19:17:41.474 LibTeleinfo::checkLine Err checksum 0x2C != 0x24
19:17:41.476 LibTeleinfo::checkLine Err checksum 0x23 != 0x26
19:17:41.686 LibTeleinfo::checkLine Err checksum 0x45 != 0x2A
19:17:41.688 LibTeleinfo::checkLine Err checksum 0x5E != 0x22
19:17:41.693 LibTeleinfo::checkLine Err checksum 0x5A != 0x30
19:17:41.939 LibTeleinfo::checkLine Err checksum 0x3A != 0x57
19:17:41.940 LibTeleinfo::checkLine Err checksum 0x3F != 0x43
19:17:41.942 LibTeleinfo::checkLine Err checksum 0x4E != 0x4C
19:17:42.184 LibTeleinfo::checkLine Err checksum 0x41 != 0x44
19:17:42.188 LibTeleinfo::checkLine Err checksum 0x38 != 0x44
19:17:42.436 LibTeleinfo: _recv_idx = 128/128 buffer overflow
19:17:42.439 LibTeleinfo::checkLine Err checksum 0x34 != 0x39
19:17:42.685 LibTeleinfo::checkLine Err checksum 0x21 != 0x24
19:17:42.689 LibTeleinfo::checkLine Err checksum 0x3F != 0x28
19:17:42.691 LibTeleinfo::checkLine Err checksum 0x26 != 0x29
19:17:43.075 LibTeleinfo::checkLine Err checksum 0x2A != 0x30
19:17:43.083 LibTeleinfo::checkLine Err checksum 0x4F != 0x30
19:17:43.086 LibTeleinfo::checkLine Err checksum 0x59 != 0x5C
19:17:43.088 LibTeleinfo::checkLine Err checksum 0x4B != 0x4D
19:17:43.092 LibTeleinfo::checkLine Err checksum 0x57 != 0x5B
19:17:43.104 LibTeleinfo::checkLine Err checksum 0x38 != 0x3C
19:17:43.166 LibTeleinfo::checkLine Err checksum 0x59 != 0x44
19:17:43.418 LibTeleinfo::checkLine Err checksum 0x21 != 0x24
19:17:43.419 LibTeleinfo::checkLine Err checksum 0x42 != 0x44
19:17:43.422 LibTeleinfo::checkLine Err checksum 0x40 != 0x42
19:17:43.675 RSL: SENSOR = {"TIC":{"EAST":73562688,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625404,"IRMS1":18,"URMS1":232,"PREF":12,"PCOUP":12,"SINSTS":4228,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768315,"EASF06":0,"EASF01":37066005,"CCASN":3496}}
19:17:43.736 LibTeleinfo::checkLine Err checksum 0x2C != 0x24
19:17:43.897 LibTeleinfo::checkLine Err checksum 0x22 != 0x25
19:17:43.901 LibTeleinfo::checkLine Err checksum 0x4C != 0x30
19:17:44.153 LibTeleinfo::checkLine Err checksum 0x25 != 0x41
19:17:44.155 LibTeleinfo::checkLine Err checksum 0x59 != 0x5C
19:17:44.157 LibTeleinfo::checkLine Err checksum 0x4E != 0x51
19:17:44.396 LibTeleinfo::checkLine Err checksum 0x4B != 0x4C
19:17:44.399 LibTeleinfo::checkLine Err checksum 0x4C != 0x44
19:17:44.403 LibTeleinfo::checkLine Err checksum 0x21 != 0x24
19:17:44.404 LibTeleinfo::checkLine Err checksum 0x40 != 0x44
19:17:44.646 LibTeleinfo::checkLine Err checksum 0x5C != 0x42
19:17:44.906 RSL: SENSOR = {"TIC":{"EAST":73562690,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625404,"IRMS1":18,"URMS1":232,"PREF":12,"PCOUP":12,"SINSTS":4228,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768317,"EASF06":0,"EASF01":37066007,"CCASN":3496}}
19:17:44.965 LibTeleinfo::checkLine Err checksum 0x33 != 0x36
19:17:44.968 LibTeleinfo::checkLine Err checksum 0x40 != 0x30
19:17:45.184 LibTeleinfo::checkLine Err checksum 0x32 != 0x22
19:17:45.191 LibTeleinfo::checkLine Err checksum 0x4C != 0x4F
19:17:45.434 LibTeleinfo::checkLine Err checksum 0x3F != 0x43
19:17:45.437 LibTeleinfo::checkLine Err checksum 0x5B != 0x4C
19:17:45.795 LibTeleinfo::checkLine Err checksum 0x40 != 0x44
19:17:45.796 LibTeleinfo::checkLine Err checksum 0x5F != 0x23
19:17:45.798 LibTeleinfo::checkLine Err checksum 0x3A != 0x44
19:17:45.938 RSL: SENSOR = {"TIC":{"EAST":73562690,"EASF05":0,"EASF07":0,"EASF10":0,"EASD01":28794373,"ERQ1":4307600,"ERQ2":117434,"ERQ3":787844,"SMAXSN":7504,"CCASN-1":3666,"UMOY1":224,"PRM":2147483647,"ADSC":"031861721681","VTIC":2,"EASF02":36496683,"CCAIN":0,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"NGTF":"BASE","EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD03":0,"EASD04":0,"ERQ4":4625405,"IRMS1":18,"URMS1":232,"PREF":12,"PCOUP":12,"SINSTS":4228,"SINSTI":0,"LTARF":"BASE","EAIT":6778140,"SMAXIN":0,"CCAIN-1":0,"SMAXSN-1":8661,"SMAXIN-1":0,"EASD02":44768318,"EASF06":0,"EASF01":37066008,"CCASN":3496}}
19:17:46.154 LibTeleinfo::checkLine Err checksum 0x37 != 0x50
19:17:46.156 LibTeleinfo::checkLine Err checksum 0x20 != 0x24
19:17:46.160 LibTeleinfo::checkLine Err checksum 0x48 != 0x30
19:17:46.411 LibTeleinfo::checkLine Err checksum 0x59 != 0x22
19:17:46.419 LibTeleinfo::checkLine Err checksum 0x36 != 0x37
19:17:46.658 LibTeleinfo::checkLine Err checksum 0x57 != 0x5B
19:17:46.664 LibTeleinfo::checkLine Err checksum 0x27 != 0x29

J'espère que les captures vont te permettre d'identifier le problème

Samquad

@Charles
Le format Shield n'existait pas quand j'ai acheté mon premier module téléinfo.
Je n'ai pas pris un shield téléinfo Wemos car j'ai créé ma propre carte sur le standard du modèle pour RPI. et finalement ça m'est utile pour tester facilement avec un RPI et picocom.

Je ne pense pas que mon cablage soit en cause.
Depuis que j'ai reçu le Pitinfo V1.4, j'ai l'impression que les trames sont complètes?

Samquad

@Charles

La trame MQT émise par tasmota téléinfo dépasse la capacité max des messages dans NodeRed qui est limitée par défaut à 1000

On m'a aidé pour augmenter cette valeur dans la configuration de NodeRed:
Editer le fichier settings.js:

sudo nano /home/pi/.node-red/settings.js

augmenter le paramètre:
"debugMaxLength: 2000"

Sauvegarder et relancer NodeRed

La trame affichée en débug s'affiche sous cette forme:

Object:
Topic: "tele/TeleInfo/SENSOR"

Payload: buffer[1454] String

{"TIC":{"EASF03":0,"EASF04":0,"EASF08":0,"EASF09":0,"EASD04":0,"NJOURF":0,"NJOURF+1":0,"EASF02":36496683,"PRM":2147483647,"RELAIS":0,"NTARF":1,"EASF05":0,"SINSTR06020NRL@XRNH221204190514":9991,"PBNTP02\SINSTS":8512,"DATE":"	<NGTF","EASF10":0,"ADSC":"031861721681","SINSTR02042NRL@XRNH221207100410":7417,"EASF01":"037424628HD@RF02026496683","EASD03":0,"SINSTS00620NRL@XRNH220208194823":10315,"SINSTR04202NRL@XRNH221208195016":10387,"EASD01":"029125668FEASD02044446480","SINSTI":534,"SINSTR00800NRL@XRNH221209123344":7944,"SINSTR04220NRL@XRNH221209123344":7944,"SINSTS06002NRL@XRNH220209194457":8468,"SINSTR04200PRL@XRNH221210104936":13237,"EAIT":"004300868\ERQ2","SINSTS02222NRL@XRNH220210104936":13237,"SINSTR02222NRL@XRNH221211000811":8456,"EASF07":0,"CCAIN":"00000CB@HN0H221212083000","IRMS1":"0100URMS1220>PRDF02BPBNTP02\RHNRTR02284","SMAXIN":0,"PREF":12,"ERQ2":117445,"ERQ3":788456,"ERQ1":"004202002HDRP2000017445","SINSTI":0,"SMAXSN-1":11541,"EAIT":6780905,"ERQ4":"0344URMS1","STGE":"003A0101","EASD04":"#EAIT","CCAIN":0,"PCOUP":12,"EASD02":45505640,"SINSTS":7339,"EAST":74658330,"SMAXIN-1":2623,"CCASN":8484,"CCAIN-1":0,"SMAXSN":11918,"CCASN-1":5768,"UMOY1":211,"VTIC":2,"URMS1":210,"ERQ4":4714036,"LTARF":"      BASE      ","EASD01":29152690,"ERQ1":4312022,"EASF01":38161647,"NGTF":"      BASE      ","EASF06":0,"IRMS1":"200<PREF02BPCNTP02\SHNRTR06233"}}

Par contre elle n'est pas reconnue comme Json object donc les champs ne peuvent pas être récupérés avec une fonction de ce type:

// Récupération des données
//Préparation requête pour Domoticz
var xvalue = {};
xvalue = msg.payload.TIC.SINSTS;
msg.payload = xvalue
return msg;

Le problème semble venir de l'impossibilité d'interpréter les charactères représentés par des dans plusieurs noms de données comme par exemple:

SINSTR06020NRL@XRNH221204190514

Ces trames apparaissent dans les log que j'ai fait avec le RPI et picocom donc on ne peut pas remettre en cause le cablage du module sur le RPI

Qu'est ce qu'on peut faire?

Samquad

@Charles

J'ai galéré mais j'ai finalement réussi à créer un flow node Red pour interpréter la trame MQT émise par tasmota téléinfo en mode standard pour envoyer les infos dans Domoticz.
La trame MQT que je reçois n'est pas exploitable json objet: le noeux json indique des erreurs contenues dans la trame.

J'ai été obligé de cleaner la trame MQT string pour supprimer tous les charactères non supportés avec un msg.payload.replace()

Voici le code de mon flow:

[{"id":"34f140f8.a2bfa","type":"tab","label":"TeleInfo","disabled":false,"info":""},{"id":"e777bc5.9f4d44","type":"comment","z":"34f140f8.a2bfa","name":"Instructions de paramétrage pour domoticz dans l'ESP Tasmota-sensor-Teleinfo il faut activer \"SetOption108 1\"","info":"Dans domoticz:\nCréer le matériel téléinfo en USB pour créer automatiquement les capteurs de mesure\n\nModifier le matériel en dummy pour rendre les capteurs virtuels\nRelever l'IDX de chaque capteur virtuel dans domoticz\n\nDans L'ESP Tasmota:\n\nParamétrer tasmota sensor avec telefinfo et vérifier que les données du compteur sont affichées sur la page web de l'ESP\nConfiguration MQTT: Renseigner Topic= TeleInfo\n\ndans le menu Console:\n\nSaisir la commande setOption108 1\n\n_______________________________\npour info:\n0 = Teleinfo telemetry into Energy MQTT JSON (default)\n1 = Teleinfo raw data only\n_______________________________\n\nVérifier la présence de trames qui commencent par:--> MQT: tele/TeleInfo/RESULT = {...\n\nDans Node-Red:\n\nDans chaque bloc fonction \"Décode Trame...\"\"\nRenseignger l'IDX Domoticz de chaque capteur virtuel associé\nAdapter les infos et les seuils au contrat\n\nDans chaque bloc \"tele/TeleInfo\" et \"mqtt/in\"\nAdapter les paramètres au serveur domtoticz\nDéployer le Flow\n\nDans Domoticz:\n\nVérifier dans les log si les messages MQTT sont bien réceptionnés\nVérifier si les capteurs affichent les données\n","x":410,"y":40,"wires":[]},{"id":"4928abc7.9f50b4","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Total","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\nXValue = \"\" + msg.payload.TIC.EASF01 + \";0;0;0;\" + msg.payload.TIC.SINSTS + \";0\";\n\nmsg.payload = {};\nmsg.payload.idx = 69;\nmsg.payload.svalue = XValue;\nreturn msg;\n\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":500,"y":140,"wires":[["566c815d.a5a5d","4e116d.9133ce94"]]},{"id":"566c815d.a5a5d","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":100,"wires":[]},{"id":"4e116d.9133ce94","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":140,"wires":[]},{"id":"a93412bc.bf78d","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":380,"wires":[]},{"id":"ea2010a9.53948","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Charge","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\n//XValue= \"\"+ Math.round((msg.payload.IINST/msg.payload.ISOUSC)*100);\n\nif (msg.payload.TIC.SINSTS>0) {\n    XValue= \"\"+ Math.round((msg.payload.TIC.IRMS1/60)*100);\n}\nelse XValue= \"0\";\n\nmsg.payload = {};\nmsg.payload.idx = 71;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":500,"y":300,"wires":[["3b94d44c.87a34c","f45557f4.05a298"]]},{"id":"f45557f4.05a298","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":300,"wires":[]},{"id":"3b94d44c.87a34c","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":280,"wires":[]},{"id":"91aaccbd.44a7","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Current","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\n\n//XValue= msg.payload.IINST+\";0;0\";\n\nif (msg.payload.TIC.SINSTS>0) {\n    XValue= msg.payload.TIC.IRMS1+\";0;0\";\n}\nelse XValue= \"0;0;0\";\n\nmsg.payload = {};\nmsg.payload.idx = 99;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":500,"y":380,"wires":[["72ded3b2.4e5e1c","a93412bc.bf78d"]]},{"id":"72ded3b2.4e5e1c","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":360,"wires":[]},{"id":"aa682529.bceab8","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":460,"wires":[]},{"id":"3906e2c8.df91ce","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Gestion alerte courant","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\nif ((msg.payload.TIC.IRMS1<48 && msg.payload.TIC.SINSTS>0) || msg.payload.TIC.SINSTS<=0) {\n    XValue= \"(1) < 80% de 60A souscrits\";\n}\nelse if (msg.payload.TIC.IRMS1 >= 48 && msg.payload.TIC.IRMS1 < 52 && msg.payload.TIC.SINSTS>0) {\n    XValue= \"(2) >80% et <90% de 60A souscrits\";\n}\nelse XValue= \"(3) >90% de 60A souscrits\";\n\nmsg.payload = {};\nmsg.payload.idx = 73;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":550,"y":460,"wires":[["899a138.e5c52f","aa682529.bceab8"]]},{"id":"899a138.e5c52f","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":440,"wires":[]},{"id":"d6e1107c.8379","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":540,"wires":[]},{"id":"c7d7f48.21e2a08","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Current en Surplus","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\n\n//XValue= msg.payload.IINST+\";0;0\";\n\nif (msg.payload.TIC.SINSTS===0) {\n    XValue= msg.payload.TIC.IRMS1+\";0;0\";\n}\nelse XValue= \"0;0;0\";\n\nmsg.payload = {};\nmsg.payload.idx = 96;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":540,"y":540,"wires":[["54692d1e.95f5a4","d6e1107c.8379"]]},{"id":"54692d1e.95f5a4","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":520,"wires":[]},{"id":"d994fe9.eb362","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame KWh","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\nXValue= msg.payload.TIC.SINSTS +\";\"+ msg.payload.TIC.EASF01;\n\nmsg.payload = {};\nmsg.payload.idx = 68;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":500,"y":220,"wires":[["5743d5d0.f6320c","b2fc7f56.9ab89"]]},{"id":"b2fc7f56.9ab89","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":220,"wires":[]},{"id":"5743d5d0.f6320c","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":200,"wires":[]},{"id":"a80552d8.42856","type":"mqtt in","z":"34f140f8.a2bfa","name":"","topic":"tele/TeleInfo/SENSOR/#","qos":"2","datatype":"utf8","broker":"ead0b0c3.e5e6d","nl":false,"rap":false,"inputs":0,"x":140,"y":100,"wires":[["5367159b1760b8b2"]]},{"id":"5e0c7c675c1407c8","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"true","targetType":"full","statusVal":"","statusType":"auto","x":450,"y":100,"wires":[]},{"id":"5367159b1760b8b2","type":"function","z":"34f140f8.a2bfa","name":"Cleaning Trame","func":"// Récupération des données MQT\n//Cleaning de la trame pour pouvoir la passer dans le noeud json\nvar xvalue = {};\nxvalue = msg.payload;\nmsg.payload = xvalue.replace(/\b|\u0004|@|\f|\t|\\\\|\\n/g, '')\nreturn msg;\n\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":140,"y":180,"wires":[["e1a1acc9fbf67ad3"]]},{"id":"e1a1acc9fbf67ad3","type":"json","z":"34f140f8.a2bfa","name":"","property":"payload","action":"","pretty":false,"x":130,"y":280,"wires":[["5e0c7c675c1407c8","4928abc7.9f50b4","d994fe9.eb362","ea2010a9.53948","91aaccbd.44a7","3906e2c8.df91ce","c7d7f48.21e2a08","c221536d537bfda3","26b7916af05ef065"]]},{"id":"26b7916af05ef065","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Total","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\nXValue = \"\" + msg.payload.TIC.EAIT + \";0;0;0;\" + msg.payload.TIC.SINSTI + \";0\";\n\nmsg.payload = {};\nmsg.payload.idx = 114;\nmsg.payload.svalue = XValue;\nreturn msg;\n\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":500,"y":620,"wires":[["576532848921fb85","1ad502b556f2e870"]]},{"id":"c221536d537bfda3","type":"function","z":"34f140f8.a2bfa","name":"Decode Trame Prod KWh","func":"// Récupération des données\n//Préparation requête pour Domoticz\nvar XValue\nXValue= msg.payload.TIC.SINSTI +\";\"+ msg.payload.TIC.EAIT;\n\nmsg.payload = {};\nmsg.payload.idx = 113;\nmsg.payload.svalue = XValue;\nreturn msg;\n","outputs":1,"noerr":0,"initialize":"","finalize":"","libs":[],"x":510,"y":700,"wires":[["97927f558ccb20a5","a34ae61157ac9378"]]},{"id":"576532848921fb85","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":600,"wires":[]},{"id":"97927f558ccb20a5","type":"debug","z":"34f140f8.a2bfa","name":"","active":false,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":830,"y":680,"wires":[]},{"id":"1ad502b556f2e870","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":620,"wires":[]},{"id":"a34ae61157ac9378","type":"mqtt out","z":"34f140f8.a2bfa","name":"","topic":"domoticz/in","qos":"","retain":"","broker":"9a37d1dd.66c5a","x":1090,"y":700,"wires":[]},{"id":"9a37d1dd.66c5a","type":"mqtt-broker","name":"","broker":"localhost","port":"1883","clientid":"","usetls":false,"compatmode":false,"keepalive":"15","cleansession":true,"birthTopic":"","birthQos":"0","birthPayload":"{\"hwid\":\"19\",\"idx\":56,\"nvalue\":0,\"svalue\":\"959\"}","closeTopic":"","closePayload":"","willTopic":"","willQos":"0","willPayload":""},{"id":"ead0b0c3.e5e6d","type":"mqtt-broker","name":"","broker":"192.168.1.200","port":"1883","clientid":"","usetls":false,"compatmode":false,"keepalive":"60","cleansession":true,"birthTopic":"","birthQos":"0","birthPayload":"","closeTopic":"","closeQos":"0","closePayload":"","willTopic":"","willQos":"0","willPayload":""}]

Conclusion:
Soit le problème vient d'erreur dans les échanges entre le linky et le module téléinfo (voir les log plus haut réalisés avec picocom)
Soit le problème vient du code dans tasmota qui envoi des trames MQT avec des charactères incompatibles avec json object (voir aussi plus haut les trames MQT).

Pour le moment ça fonctionne dans l'état mais il y a un problème quelque part...

Je suis dispo four poursuivre des test si besoin pour faire faire progresser le système

A suivre...

Charles

@Samquad je suis désolé, pour moi la trame est polluée à la base, je ne sais dire si ça vient du compteur ou non, sachant que nous avons a peut prêt tout essayé coté carte électronique et c'est la 1ere fois que je vois ça non resolvable.

Samquad

@Charles
Bonjour Charles,
Je déterre le sujet car j'avais réussi à créer flow node red pour épurer les données polluées et les intégrer dans Domoticz. Ca fonctionnait avec quelques bug mais globalement je pouvais lire mes données.
Problème : depuis 15 jours mon Wemos Tasmota en V12.1.1.2 ne renvoi plus de trame MQTT le code téléinfo n'arrive plus à traiter ma trame et j'ai ces logs dans la console (dont le code d'erreur buffer overflow)

06:53:53.986 LibTeleinfo::checkLine Err checksum 0x3B != 0x39
06:53:53.987 LibTeleinfo::checkLine Err checksum 0x5B != 0x3E
06:53:53.991 LibTeleinfo::checkLine Err checksum 0x3D != 0x44
06:53:54.243 LibTeleinfo: _recv_idx = 128/128 buffer overflow
06:53:54.490 LibTeleinfo::checkLine Err checksum 0x4F != 0x4C
06:53:54.492 LibTeleinfo::checkLine Err checksum 0x4D != 0x50
06:53:54.498 LibTeleinfo::checkLine Err checksum 0x3D != 0x27
06:53:54.744 LibTeleinfo::checkLine Err checksum 0x25 != 0x28
06:53:54.755 LibTeleinfo::checkLine Err checksum 0x21 != 0x55
06:53:54.996 LibTeleinfo::checkLine Err checksum 0x3B != 0x41
06:53:54.998 LibTeleinfo::checkLine Err checksum 0x5F != 0x24
06:53:54.002 LibTeleinfo::checkLine Err checksum 0x4E != 0x5B
06:53:55.233 LibTeleinfo::checkLine Err checksum 0x56 != 0x58
06:53:55.238 LibTeleinfo::checkLine Err checksum 0x3B != 0x34
06:53:55.501 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NGTF":"      BASE      ","EASF03":0,"EASF07":0,"EASF08":0,"EASF09":0,"EASD02":52518559,"EASD03":0,"EASD04":0,"ERQ3":999393,"ERQ4":5980466,"IRMS1":3,"URMS1":236,"PREF":12,"PCOUP":12,"SINSTS":0,"SMAXSN-1":6796,"CCAIN":12,"STGE":"003A0301","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"NJOURF+1":0,"ADSC":"031861721681","VTIC":2,"LTARF":"      BASE      ","EAST":85091811,"EASF04":0,"EASF05":0,"EASF10":0,"EASD01":32573252,"EAIT":8244212,"ERQ1":4360930,"ERQ2":136537,"SMAXSN":3766,"CCAIN-1":0,"EASF02":36496683,"SMAXIN-1":4899,"UMOY1":237,"CCASN-1":352,"CCASN":362,"EASF06":0,"SMAXIN":804,"EASF01":48595128,"SINSTI":733}}
06:53:55.738 LibTeleinfo::checkLine Err checksum 0x2C != 0x24
06:53:55.740 LibTeleinfo::checkLine Err checksum 0x22 != 0x25
06:53:55.746 LibTeleinfo::checkLine Err checksum 0x4B != 0x30
06:53:55.993 LibTeleinfo::checkLine Err checksum 0x4A != 0x30
06:53:56.237 LibTeleinfo::checkLine Err checksum 0x3C != 0x41
06:53:56.239 LibTeleinfo::checkLine Err checksum 0x40 != 0x39
06:53:56.243 LibTeleinfo::checkLine Err checksum 0x3B != 0x3E
06:53:56.245 LibTeleinfo::checkLine Err checksum 0x57 != 0x58

J'ai essayé avec la version V12.5.0 et c'est pire le module plante quand je branche la liaison TIC et la conf du Wemos Tasmota saute à chaque fois.
Pour info, j'ai téléchargé le firmware compilé sur ce lien:
https://github.com/Jason2866/Tasmota-specials/blob/firmware/firmware/tasmota/other/tasmota-teleinfo.bin.gz

J'ai remis le Pitinfo sur mon RPI3 pour tester, je lance cette commande

picocom -b 9600 -d 7 -p e -f n /dev/ttyAMA0

j'obtiens ça:

DATE	E230624072123		>
NGTF	      BASE      	<
LTARF	      BASE      	F
EAST	085091803	1
EASF01	048595120	D
EASF02	036496683	P
EASF03	000000000	$
EASF04	000000000	%
EASF05	000000000	&
EASF06	000000000	'
EASF07	000000000	(
EASF08	000000000	)
EASF09	000000000	*
EASF10	000000000	"
EASD01	032573244	>
EASD02	052518559	I
EASD03	000000000	"
EASD04	000000000	#
EAIT	008244172	!
ERQ1	004360930	T
ERQ2	000136522	O
ERQ3	000999325	"
ERQ4	005980440	\
IRMS1	002	0
URMS1	237	F
PREF	12	B
PCOUP	12	\
SINSTS	00455	T
SMAXSN	E230624035413	03766	A
SMAXSN-1	E230623214513	06796	$
SINSTI	00000	<
SMAXIN	E230624000000	00000	Q
SMAXIN-1	E230623132306	04899	[
CCASN	E230624070000	00352	:
CCASN-1	E230624063000	00610	W
CCAIN	E230624070000	00000	&
CCAIN-1	E230624063000	00000	F
UMOY1	E230624072000	236	0
STGE	003A0101	;
MSG1	PAS DE          MESSAGE         	<
PRM	12432850902420	+
RELAIS	000	B
NTARF	01	N
NJOURF	00	&
NJOURF+1	00	B
PJOURF+1	00008001 NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE	9
ADSC	031861721681	9
VTIC	02	J
DATE	E230624072124		?
NGTF	      BASE      	<
LTARF	      BASE      	F
EAST	085091803	1
EASF01	048595120	D
EASF02	036496683	P
EASF03	000000000	$
EASF04	000000000	%
EASF05	000000000	&
EASF06	000000000	'
EASF07	000000000	(
EASF08	000000000	)
EASF09	000000000	*
EASF10	000000000	"
EASD01	032573244	>
EASD02	052518559	I
EASD03	000000000	"
EASD04	000000000	#
EAIT	008244172	!
ERQ1	004360930	T
ERQ2	000136522	O
ERQ3	000999325	"
ERQ4	005980440	\
IRMS1	002	0
URMS1	237	F
PREF	12	B
PCOUP	12	\
SINSTS	00453	R
SMAXSN	E230624035413	03766	A
SMAXSN-1	E230623214513	06796	$
SINSTI	00000	<
SMAXIN	E230624000000	00000	Q
SMAXIN-1	E230623132306	04899	[
CCASN	E230624070000	00352	:
CCASN-1	E230624063000	00610	W
CCAIN	E230624070000	00000	&
CCAIN-1	E230624063000	00000	F
UMOY1	E230624072000	236	0
STGE	003A0101	;
MSG1	PAS DE          MESSAGE         	<
PRM	12432850902420	+
RELAIS	000	B
NTARF	01	N
NJOURF	00	&
NJOURF+1	00	B
PJOURF+1	00008001 NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE	9
ADSC	031861721681	9
VTIC	02	J
DATE	E230624072125		@
NGTF	      BASE      	<
LTARF	      BASE      	F
EAST	085091803	1
EASF01	048595120	D
EASF02	036496683	P
EASF03	000000000	$
EASF04	000000000	%
EASF05	000000000	&
EASF06	000000000	'
EASF07	000000000	(
EASF08	000000000	)
EASF09	000000000	*
EASF10	000000000	"
EASD01	032573244	>
EASD02	052518559	I
EASD03	000000000	"
EASD04	000000000	#
EAIT	008244172	!
ERQ1	004360930	T
ERQ2	000136522	O
ERQ3	000999325	"
ERQ4	005980440	\
IRMS1	002	0
URMS1	237	F
PREF	12	B
PCOUP	12	\
SINSTS	00454	S
SMAXSN	E230624035413	03766	A
SMAXSN-1	E230623214513	06796	$
SINSTI	00000	<
SMAXIN	E230624000000	00000	Q
SMAXIN-1	E230623132306	04899	[
CCASN	E230624070000	00352	:
CCASN-1	E230624063000	00610	W
CCAIN	E230624070000	00000	&
CCAIN-1	E230624063000	00000	F
UMOY1	E230624072000	236	0
STGE	003A0101	;
MSG1	PAS DE          MESSAGE         	<
PRM	12432850902420	+
RELAIS	000	B
NTARF	01	N
NJOURF	00	&
NJOURF+1	00	B
PJOURF+1	00008001 NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE NONUTILE	9
ADSC	031861721681	9
VTIC	02	J
DATE	E230624072126		A
NGTF	      BASE      	<
LTARF	      BASE      	F
EAST	085091803	1
EASF01	048595120	D
EASF02	036496683	P
EASF03	000000000	$
EASF04	000000000	%
EASF05	000000000	&
EASF06	000000000	'
EASF07	000000000	(
EASF08	000000000	)
EASF09	000000000	*
EASF10	000000000	"
EASD01	032573244	>
EASD02	052518559	I
EASD03	000000000	"
EASD04	000000000	#
EAIT	008244172	!
ERQ1	004360930	T
ERQ2	000136522	O
ERQ3	000999325	"
ERQ4	005980441	]
IRMS1	002	0
URMS1	237	F
PREF	12	B
PCOUP	12	\
SINSTS	00456	U
SMAXSN	E230624035413	03766	A
SMAXSN-1	E230623214513	06796	$
SINSTI	00000	<
SMAXIN	E230624000000	00000	Q
SMAXIN-1	E230623132
Terminating...
Skipping tty reset...
Thanks for using picocom

PJOURF+1 indique une valeur étrange?
Je pense que le buffer de réception du tasmota sature et le traitement des données ne peut pas être effectué.
Je viens de te commander le WeMos Teleinfo, on verra si le problème est lié à mon montage mais c'est pas sur... A suivre donc...

Tasmota sensor 12.1.1.2 avec linky mode Standard --> Libteleinfo checkline error checksum...

11

5.4k

461

4.3k

Top Topics

Popular Tags