Remora problem?
-
Hi,
Just tested the three blue sharks I ordered from the shoppe and they all passed. I measured 970mA from a single IMR 16340 (4.2V in) delivered to an MC-E emitter wired as 2s2p (7.2Vf). The same battery in direct drive would not even light the 2s2p config. The sharks had the pots removed and no pads bridged.
After adding the Remora to one of them, the same test yielded 110mA on low, ~340mA on medium (I forget the exact measurement) and only 840mA on high. Where'd my 970mA go? I tesed with a 7.2v 6xAAA battery carrier that drives the same 2p2s at > 1.5A and still the shark with Remora only delivered 840mA to the emitter. I also noted in this configuration that Low and Med. modes both pushed 760mA to the emitter. What happened to my nice low and med. modes when Vin was almost = Vout?Please help.
I didn't find the right solution from the Internet.
References:-
http://www.candlepowerforums.com/vb/showthread.php?231469-Remora-problem
Animated video studioThanks!
-
Hi,
Just tested the three blue sharks I ordered from the shoppe and they all passed. I measured 970mA from a single IMR 16340 (4.2V in) delivered to an MC-E emitter wired as 2s2p (7.2Vf). The same battery in direct drive would not even light the 2s2p config. The sharks had the pots removed and no pads bridged.
After adding the Remora to one of them, the same test yielded 110mA on low, ~340mA on medium (I forget the exact measurement) and only 840mA on high. Where'd my 970mA go? I tesed with a 7.2v 6xAAA battery carrier that drives the same 2p2s at > 1.5A and still the shark with Remora only delivered 840mA to the emitter. I also noted in this configuration that Low and Med. modes both pushed 760mA to the emitter. What happened to my nice low and med. modes when Vin was almost = Vout?Please help.
I didn't find the right solution from the Internet.
References:-
http://www.candlepowerforums.com/vb/showthread.php?231469-Remora-problem
Animated video studioThanks!
Hi @joejonsme
You speak of the Remora which allows to manage your electric heating?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login