Teleinfo et Wemos D1 mini : aucun signal
-
Bonjour,
Je ne reçois aucun signal et ne sais pas comment debugger la situation.
Auriez-vous une idée d'une erreur que j'aurais pu faire?
Merci par avance.La situation
- Compte linky en mode historique
- Wemos D1 mini connecté à un téléinfo 1.1
- Tasmota Teleinfo installé via https://jason2866.github.io/Tasmota-specials/
- Fils bien connecté au compteur linky: la diode du shield clignote rouge
- TInfo RX sur GPIO13
Console
Par rapport à d'autre Log que j'ai pu voir, le "always enabled" n'apparait pas.
00:00:00.001 HDW: ESP8266EX 00:00:00.050 CFG: Loaded from flash at F4, Count 16 00:00:00.055 QPC: Count 1 00:00:00.064 Project tasmota - Teleinfo Version 2022.01.2(teleinfo)-2_7_4_9(2022-01-07T16:41:31) 00:00:00.064 TIC: RX on GPIO13, baudrate 1200 00:00:00.701 SNS: Hardware Serial 00:00:00.701 TIC: using hardware serial 00:00:00.702 TIC: Raw mode enabled 00:00:01.233 WIF: Connecting to AP1 RAFIKI Channel 5 BSSId 00:11:32:A5:21:82 in mode 11n as tasmota-55E758-1880... 00:00:02.752 WIF: Connected 00:00:03.005 HTP: Web server active on tasmota-55E758-1880 with IP address 10.0.4.79 18:58:08.024 RSL: INFO1 = {"Info1":{"Module":"Wemos Teleinfo","Version":"2022.01.2(teleinfo)","FallbackTopic":"cmnd/DVES_55E758_fb/","GroupTopic":"cmnd/tasmotas/"}} 18:58:08.026 RSL: INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-55E758-1880","IPAddress":"10.0.4.79"}} 18:58:08.027 RSL: INFO3 = {"Info3":{"RestartReason":"Software/System restart"}} 18:58:10.724 QPC: Reset 18:58:12.653 RSL: STATE = {"Time":"2022-01-07T18:58:12","Uptime":"0T00:00:10","UptimeSec":10,"Vcc":3.055,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":26,"MqttCount":0,"Wifi":{"AP":1,"SSId":"RAFIKI","BSSId":"00:11:32:A5:21:82","Channel":5,"Mode":"11n","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:04"}} 18:58:12.659 RSL: SENSOR = {"Time":"2022-01-07T18:58:12","ENERGY":{"TotalStartTime":"2022-01-07T18:39:23","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period": 0,"Power": 0,"Current":0.000},"TIC":{}}