Compilation ESP Home pour avoir la TIC sur cet ESP

[mikebzh44]

Bonjour.

Je viens de recevoir ma carte Denky D4 et je n'arrive pas à compiler un fichier YAML pour Home Assistant

J'ai cette erreur :

INFO ESPHome 2024.6.6
INFO Reading configuration /config/esphome/esphome-web-f5bfa8.yaml...
Failed config

uart: [source /config/esphome/esphome-web-f5bfa8.yaml:77]
  - id: uart_bus
    
    This pin cannot be used on ESP32s and is already used by the flash interface (function: Flash Data 1).
    rx_pin: GPIO8
    baud_rate: 1200
    parity: EVEN
    data_bits: 7

Et voici mon code YAML :

substitutions:
  name: esp-tic-feyree
  friendly_name: esp-tic-feyree
  device_description: Infos TIC Recharge VE

esphome:
  name: ${name}
  friendly_name: ${friendly_name}
  comment: ${device_description}
  min_version: 2024.6.0
  name_add_mac_suffix: false
  project:
    name: esphome.web
    version: '1.0'

esp32:
#  board: adafruit_qtpy_esp32
  board: denky_d4
  framework:
    type: esp-idf

# Enable logging
logger:

# Enable Home Assistant API
api:

# Allow Over-The-Air updates
ota:
- platform: esphome

# Allow provisioning Wi-Fi via serial
improv_serial:

wifi:
  # Set up a wifi access point
  ap: {}

# In combination with the `ap` this allows the user
# to provision wifi credentials to the device via WiFi AP.
captive_portal:

dashboard_import:
  package_import_url: github://esphome/example-configs/esphome-web/esp32.yaml@main
  import_full_config: true

# Sets up Bluetooth LE (Only on ESP32) to allow the user
# to provision wifi credentials to the device.
esp32_improv:
  authorizer: none

# To have a "next url" for improv serial
web_server:
  local: true
  port: 80
#  auth:
#    username: !secret esphome_web_server_username
#    password: !secret esphome_web_server_password

# Time: https://esphome.io/components/time.html
time:
  - platform: homeassistant
    timezone: "Europe/Paris"
    id: homeassistant_time

# Status Binary Sensor: https://esphome.io/components/binary_sensor/status.html
binary_sensor:
  - platform: status
    name: "Sagem Status"

# Restart Button: https://esphome.io/components/button/restart.html
button:
  - platform: restart
    name: "Sagem Restart"

# https://esphome.io/custom/uart.html
uart:
  id: uart_bus
  rx_pin: GPIO8 # Pin Rx2
  baud_rate: 1200
  parity: EVEN
  data_bits: 7
  #rx_buffer_size: 512
  
# https://esphome.io/components/sensor/teleinfo.html
teleinfo:
    update_interval: 60s
    historical_mode: true

# https://esphome.io/components/sensor/index.html
sensor:
  # WiFi
  - platform: wifi_signal
    name: "WiFi Signal Sensor"
    update_interval: 60s
    unit_of_measurement: dB
    accuracy_decimals: 0
    force_update: false
    icon: mdi:wifi
  # Uptime
  - platform: uptime
    id: uptime_seconds
    name: "Uptime Sensor"
    update_interval: 60s
    unit_of_measurement: s
    accuracy_decimals: 0
    force_update: false
    icon: mdi:clock-start
  # Production
  - platform: teleinfo
    tag_name: "BASE"
    name: "Recharge VE"
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing
    icon: mdi:flash
    accuracy_decimals: 2
    filters:
      - multiply: 0.001
      - filter_out: 0

text_sensor:
  - platform: template
    name: Uptime
    update_interval: 60s
    icon: mdi:clock-start
    lambda: |-
      int seconds = (id(uptime_seconds).state);
      int days = seconds / (24 * 3600);
      seconds = seconds % (24 * 3600);
      int hours = seconds / 3600;
      seconds = seconds % 3600;
      int minutes = seconds /  60;
      seconds = seconds % 60;
      if ( days ) {
        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
      } else if ( hours ) {
        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
      } else if ( minutes ) {
        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
      } else {
        return { (String(seconds) +"s").c_str() };
      }

Quand j'ai initialisé la carte avec ESPHome, elle était vu comme :

esp32:
  board: esp32dev
  framework:
    type: arduino

Mais même avec cette définition, la compilation donne la même erreur.

[Charles]

@mikebzh44

La solution doit se trouver dans ce post https://github.com/esphome/issues/issues/5932 (no testé de mon coté) mais ça devrait fonctionner

esphome:
  name: linky
  friendly_name: Linky

esp32:
  board: denky_d4
  framework:
    type: esp-idf

uart:
  rx_pin: GPIO8
  ignore_pin_validation_error: true
  baud_rate: 9600
  parity: EVEN
  data_bits: 7
  stop_bits: 1

[mikebzh44]

@Charles Merci, je vais tester ça ce WE

[mikebzh44]

Je confirme, ça marche nickel !!

Mon YAML au complet :

substitutions:
  devicename: esp-tic-feyree
  friendly_name: esp-tic-feyree
  device_description: Infos TIC chargeur VE

esphome:
  name: $devicename
  friendly_name: $friendly_name
  comment: ${device_description}
  min_version: 2024.6.0
  name_add_mac_suffix: false
  project:
    name: esphome.web
    version: '1.0'

esp32:
  board: denky_d4
  framework:
    type: arduino
  
# Enable logging
logger:
  baud_rate: 0
  level: INFO 
  #esp8266_store_log_strings_in_flash: False

# Enable Home Assistant API
api:

ota:
  platform: esphome
  password: "472f4e3996e22b5cc959fefe4f46d54e"

wifi:
  #ssid: !secret wifi_ssid
  #password: !secret wifi_password
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap: {}

# Web Server: https://esphome.io/components/web_server.html
web_server:
  local: true
  port: 80
#  auth:
#    username: !secret esphome_web_server_username
#    password: !secret esphome_web_server_password

# Time: https://esphome.io/components/time.html
time:
  - platform: homeassistant
    timezone: "Europe/Paris"
    id: homeassistant_time

captive_portal:

# Status Binary Sensor: https://esphome.io/components/binary_sensor/status.html
binary_sensor:
  - platform: status
    name: "Sagem EV Status"

# Restart Button: https://esphome.io/components/button/restart.html
button:
  - platform: restart
    name: "Sagem EV Restart"

# https://esphome.io/custom/uart.html
uart:
  rx_pin:
    number: GPIO8 # Pin Rx2
    ignore_pin_validation_error: true
  baud_rate: 1200
  parity: EVEN
  data_bits: 7
  #rx_buffer_size: 512
  
# https://esphome.io/components/sensor/teleinfo.html
teleinfo:
    update_interval: 60s
    historical_mode: true

# https://esphome.io/components/sensor/index.html
sensor:
  # WiFi
  - platform: wifi_signal
    name: "WiFi Signal Sensor"
    update_interval: 60s
    unit_of_measurement: dB
    accuracy_decimals: 0
    force_update: false
    icon: mdi:wifi
  # Uptime
  - platform: uptime
    id: uptime_seconds
    name: "Uptime Sensor"
    update_interval: 60s
    unit_of_measurement: s
    accuracy_decimals: 0
    force_update: false
    icon: mdi:clock-start
  # Production
  - platform: teleinfo
    tag_name: "BASE"
    name: "Recharge VE"
    unit_of_measurement: kWh
    device_class: energy
    state_class: total_increasing
    icon: mdi:flash
    accuracy_decimals: 2
    filters:
      - multiply: 0.001
      - filter_out: 0

text_sensor:
  - platform: template
    name: Uptime
    update_interval: 60s
    icon: mdi:clock-start
    lambda: |-
      int seconds = (id(uptime_seconds).state);
      int days = seconds / (24 * 3600);
      seconds = seconds % (24 * 3600);
      int hours = seconds / 3600;
      seconds = seconds % 3600;
      int minutes = seconds /  60;
      seconds = seconds % 60;
      if ( days ) {
        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
      } else if ( hours ) {
        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
      } else if ( minutes ) {
        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
      } else {
        return { (String(seconds) +"s").c_str() };
      }

[mikebzh44]

@Charles Du coup, je garde la carte et je trouverai bien une utilité pour le PiTInfo que j'ai commandé

[ch_2i]

@mikebzh44 je peux annuler ta commande du Pitinfo si tu veux ?

[mikebzh44]

@ch_2i Si tu peux le faire, je veux bien, merci.

[Charles]

@mikebzh44 C'est fait

[mikebzh44]

@Charles Top, merci !