Tasmota sensor 12.1.1.2 avec linky mode Standard --> Libteleinfo checkline error checksum...

[Samquad]

Bonjour,

j'ai un module pitinfo V1.3 connecté sur un wemos mini D1 avec tamstota sensor V12.1.1.2 compilé avec l'option teleinfo. L'ensemble est branché sur mon compteur Linky.
Mon compteur était en mode historique et tout fonctionnait bien mais il me manquait les informations de production solaire (index P injection pour la revente de surplus).
Tasmota envoi la trame MQTT, J'utilise NodeRed pour traiter la trame et envoyer les valeurs sur des capteurs Dummy dans Domoticz. j'ai aussi 1 sonde de température et un capteur en mode compteur de branché sur le Wemos.

j'ai fait changer à Enedis le mode de transmission pour passer en mode Standard.
J'ai changé le paramétrage dans tasmota avec la commande:

energyconfig standard

Dans la console, je reçois une trame qui me semble incomplète et j'ai beaucoup d'erreurs

16:15:38.322 CMD: energyconfig
16:15:38.326 TIC: Settings Mode:standard, RX:GPIO3, EN:None, Raw:full, Skip:3, Limit:0
16:15:38.332 MQT: stat/TeleInfo/RESULT = {"EnergyConfig":"Done"}
16:15:39.421 MQT: domoticz/in = {"idx":62,"nvalue":0,"svalue":"4269","Battery":100,"RSSI":5}
16:15:39.448 MQT: tele/TeleInfo/SENSOR = {"Time":"2022-10-23T16:15:39","COUNTER":{"C1":4269},"ENERGY":{"TotalStartTime":"2022-10-23T00:00:00","Total":-21468.088,"Yesterday":1.445,"Today":6.750,"Period":266,"Power":3016,"ApparentPower":3016,"ReactivePower":0,"Factor":1.00,"Voltage":232,"Current":13.000,"Load":108},"TIC":{"SMAXSN":5621,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"EASF03":0,"EASF08":0,"EASF09":0,"EASD04":0,"IRMS1":13,"PREF":12,"PCOUP":12,"SINSTS":3145,"SINSTI":0,"NJOURF+1":0,"VTIC":2,"EAST":71465204,"EASF05":0,"EASF06":0,"EASD01":28147111,"ERQ2":113611,"ERQ3":768785,"
16:15:39.508 LibTeleinfo::checkLine Err checksum 0x4E != 0x46
16:15:39.510 LibTeleinfo::checkLine Err checksum 0x2F != 0x30
16:15:39.511 LibTeleinfo::checkLine Err checksum 0x2A != 0x24
16:15:39.517 LibTeleinfo::checkLine Err checksum 0x2F != 0x29
16:15:39.519 LibTeleinfo::checkLine Err checksum 0x32 != 0x2A
16:15:39.753 LibTeleinfo::checkLine Err checksum 0x52 != 0x01
16:15:39.755 LibTeleinfo::checkLine Err checksum 0x2B != 0x23
16:15:39.758 LibTeleinfo::checkLine Err checksum 0x23 != 0x24
16:15:39.760 LibTeleinfo::checkLine Err checksum 0x26 != 0x21
16:15:39.762 LibTeleinfo::checkLine Err checksum 0x4B != 0x33
16:15:39.764 LibTeleinfo::checkLine Err checksum 0x47 != 0x41
16:15:40.002 LibTeleinfo::checkLine Err checksum 0x44 != 0x3C
16:15:40.021 MQT: tele/TeleInfo/SENSOR = {"TIC":{"SMAXSN":5621,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"EASF03":0,"EASF08":0,"EASF09":0,"EASD04":0,"IRMS1":13,"PREF":12,"PCOUP":12,"SINSTS":3150,"SINSTI":0,"NJOURF+1":0,"VTIC":2,"EAST":71465204,"EASF05":0,"EASF06":0,"EASD01":28147111,"ERQ2":113611,"ERQ3":768785,"
16:15:40.026 LibTeleinfo::checkLine Err checksum 0x43 != 0x41
16:15:40.028 LibTeleinfo::checkLine Err checksum 0x56 != 0x1C
16:15:40.252 LibTeleinfo::checkLine Err checksum 0x47 != 0x3F
16:15:40.253 LibTeleinfo::checkLine Err checksum 0x48 != 0x40
16:15:40.256 LibTeleinfo::checkLine Err checksum 0x50 != 0x4E
16:15:40.259 LibTeleinfo::checkLine Err checksum 0x46 != 0x42
16:15:40.508 LibTeleinfo::checkLine Err checksum 0x36 != 0x2E
16:15:40.752 LibTeleinfo::checkLine Err checksum 0x2C != 0x26
16:15:40.754 LibTeleinfo::checkLine Err checksum 0x2F != 0x27
16:15:40.758 LibTeleinfo::checkLine Err checksum 0x41 != 0x28
16:15:40.759 LibTeleinfo::checkLine Err checksum 0x41 != 0x39
16:15:41.003 LibTeleinfo::checkLine Err checksum 0x20 != 0x5A
16:15:41.011 LibTeleinfo::checkLine Err checksum 0x56 != 0x3C
16:15:48.031 LibTeleinfo::checkLine Err checksum 0x5F != 0x5C
16:15:48.033 LibTeleinfo::checkLine Err checksum 0x58 != 0x52
16:15:48.034 LibTeleinfo::checkLine Err checksum 0x40 != 0x38
16:15:48.036 LibTeleinfo::checkLine Err checksum 0x4E != 0x1C
16:15:48.038 LibTeleinfo::checkLine Err checksum 0x41 != 0x3C
16:15:48.040 LibTeleinfo::checkLine Err checksum 0x42 != 0x22
16:15:48.041 LibTeleinfo::checkLine Err checksum 0x44 != 0x0C
16:15:48.253 LibTeleinfo::checkLine Err checksum 0x2C != 0x20
16:15:48.255 LibTeleinfo::checkLine Err checksum 0x47 != 0x40
16:15:48.257 LibTeleinfo::checkLine Err checksum 0x40 != 0x3C
16:15:48.754 LibTeleinfo::checkLine Err checksum 0x2E != 0x26
16:15:48.758 LibTeleinfo::checkLine Err checksum 0x43 != 0x29
16:15:49.002 LibTeleinfo::checkLine Err checksum 0x28 != 0x22
16:15:49.006 LibTeleinfo::checkLine Err checksum 0x37 != 0x20
16:15:49.008 LibTeleinfo::checkLine Err checksum 0x31 != 0x29
16:15:49.014 LibTeleinfo::checkLine Err checksum 0x5A != 0x30
16:15:49.015 LibTeleinfo::checkLine Err checksum 0x3F != 0x01
16:15:49.017 LibTeleinfo::checkLine Err checksum 0x47 != 0x1C
16:15:49.252 LibTeleinfo::checkLine Err checksum 0x58 != 0x52
16:15:49.254 LibTeleinfo::checkLine Err checksum 0x58 != 0x38
16:15:49.256 LibTeleinfo::checkLine Err checksum 0x51 != 0x1C
16:15:49.258 LibTeleinfo::checkLine Err checksum 0x3F != 0x22
16:15:49.507 LibTeleinfo::checkLine Err checksum 0x5E != 0x20
16:15:49.526 MQT: tele/TeleInfo/SENSOR = {"TIC":{"SMAXSN":5621,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"EASF03":0,"EASF08":0,"EASF09":0,"EASD04":0,"IRMS1":14,"PREF":12,"PCOUP":12,"SINSTS":3143,"SINSTI":0,"NJOURF+1":0,"VTIC":2,"EAST":71465213,"EASF05":0,"EASF06":0,"EASD01":28147111,"ERQ2":113611,"ERQ3":768785,"
16:15:49.531 LibTeleinfo::checkLine Err checksum 0x45 != 0x40
16:15:49.754 LibTeleinfo::checkLine Err checksum 0x4A != 0x46
16:15:50.003 LibTeleinfo::checkLine Err checksum 0x3B != 0x10
16:15:50.005 LibTeleinfo::checkLine Err checksum 0x2D != 0x25
16:15:50.009 LibTeleinfo::checkLine Err checksum 0x3E != 0x28
16:15:50.010 LibTeleinfo::checkLine Err checksum 0x30 != 0x2A
16:15:50.014 LibTeleinfo::checkLine Err checksum 0x44 != 0x30
16:15:50.253 LibTeleinfo::checkLine Err checksum 0x2B != 0x23
16:15:50.259 LibTeleinfo::checkLine Err checksum 0x3F != 0x30
16:15:50.260 LibTeleinfo::checkLine Err checksum 0x4B != 0x33
16:15:50.262 LibTeleinfo::checkLine Err checksum 0x4D != 0x41
16:15:50.264 LibTeleinfo::checkLine Err checksum 0x48 != 0x42
16:15:50.266 LibTeleinfo::checkLine Err checksum 0x46 != 0x1C
16:15:50.267 LibTeleinfo::checkLine Err checksum 0x5B != 0x56
16:15:50.269 LibTeleinfo::checkLine Err checksum 0x58 != 0x38
16:15:50.270 LibTeleinfo::checkLine Err checksum 0x52 != 0x1C
16:15:50.508 LibTeleinfo::checkLine Err checksum 0x3D != 0x22
16:15:50.510 LibTeleinfo::checkLine Err checksum 0x26 != 0x5E
16:15:50.511 LibTeleinfo::checkLine Err checksum 0x5A != 0x20
16:15:50.513 LibTeleinfo::checkLine Err checksum 0x3B != 0x40
16:15:50.753 LibTeleinfo: _recv_idx = 128/128 buffer overflow
16:15:51.003 LibTeleinfo::checkLine Err checksum 0x50 != 0x4A
16:15:51.005 LibTeleinfo::checkLine Err checksum 0x33 != 0x2E
16:15:51.007 LibTeleinfo::checkLine Err checksum 0x52 != 0x4A
16:15:51.009 LibTeleinfo::checkLine Err checksum 0x37 != 0x25
16:15:51.298 LibTeleinfo::checkLine Err checksum 0x2D != 0x27
16:15:51.302 LibTeleinfo::checkLine Err checksum 0x41 != 0x39
16:15:51.306 LibTeleinfo::checkLine Err checksum 0x5D != 0x5A
16:15:51.308 LibTeleinfo::checkLine Err checksum 0x4F != 0x49
16:15:51.508 LibTeleinfo::checkLine Err checksum 0x56 != 0x4E
16:15:51.753 LibTeleinfo::checkLine Err checksum 0x39 != 0x01
16:15:51.755 LibTeleinfo::checkLine Err checksum 0x52 != 0x5E
16:15:51.757 LibTeleinfo::checkLine Err checksum 0x2E != 0x26
16:15:52.022 MQT: tele/TeleInfo/SENSOR = {"TIC":{"SMAXSN":5621,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"EASF03":0,"EASF08":0,"EASF09":0,"EASD04":0,"IRMS1":14,"PREF":12,"PCOUP":12,"SINSTS":3143,"SINSTI":0,"NJOURF+1":0,"VTIC":2,"EAST":71465214,"EASF05":0,"EASF06":0,"EASD01":28147111,"ERQ2":113611,"ERQ3":768785,"
16:15:52.027 LibTeleinfo::checkLine Err checksum 0x43 != 0x09
16:15:52.029 LibTeleinfo::checkLine Err checksum 0x3D != 0x3C
16:15:52.253 LibTeleinfo::checkLine Err checksum 0x29 != 0x0B
16:15:52.255 LibTeleinfo::checkLine Err checksum 0x2A != 0x24
16:15:52.259 LibTeleinfo::checkLine Err checksum 0x3B != 0x27
16:15:52.260 LibTeleinfo::checkLine Err checksum 0x2F != 0x29
16:15:52.508 LibTeleinfo::checkLine Err checksum 0x57 != 0x30
16:15:52.510 LibTeleinfo::checkLine Err checksum 0x2A != 0x22
16:15:52.515 LibTeleinfo::checkLine Err checksum 0x24 != 0x0D
16:15:52.517 LibTeleinfo::checkLine Err checksum 0x28 != 0x22
16:15:52.519 LibTeleinfo::checkLine Err checksum 0x3B != 0x33
16:15:52.755 LibTeleinfo::checkLine Err checksum 0x49 != 0x41
16:15:52.757 LibTeleinfo::checkLine Err checksum 0x54 != 0x1C
16:15:52.759 LibTeleinfo::checkLine Err checksum 0x5B != 0x20
16:15:53.002 LibTeleinfo::checkLine Err checksum 0x47 != 0x3F
16:15:53.004 LibTeleinfo::checkLine Err checksum 0x48 != 0x42
16:15:53.005 LibTeleinfo::checkLine Err checksum 0x52 != 0x4E
16:15:53.007 LibTeleinfo::checkLine Err checksum 0x2A != 0x26
16:15:53.009 LibTeleinfo::checkLine Err checksum 0x4A != 0x42
16:15:53.254 LibTeleinfo::checkLine Err checksum 0x38 != 0x30
16:15:53.506 LibTeleinfo::checkLine Err checksum 0x2E != 0x24
16:15:53.508 LibTeleinfo::checkLine Err checksum 0x2C != 0x26
16:15:53.512 LibTeleinfo::checkLine Err checksum 0x2C != 0x30
16:15:53.514 LibTeleinfo::checkLine Err checksum 0x28 != 0x22
16:15:53.752 LibTeleinfo::checkLine Err checksum 0x5C != 0x5A
16:15:53.754 LibTeleinfo::checkLine Err checksum 0x4D != 0x49
16:15:54.003 LibTeleinfo::checkLine Err checksum 0x2E != 0x4E
16:15:54.005 LibTeleinfo::checkLine Err checksum 0x3A != 0x01
16:15:54.007 LibTeleinfo::checkLine Err checksum 0x44 != 0x26
16:15:54.253 LibTeleinfo::checkLine Err checksum 0x33 != 0x2B
16:15:54.509 LibTeleinfo::checkLine Err checksum 0x31 != 0x3C
16:15:54.511 LibTeleinfo::checkLine Err checksum 0x4E != 0x46
16:15:54.513 LibTeleinfo::checkLine Err checksum 0x2A != 0x24
16:15:54.753 LibTeleinfo::checkLine Err checksum 0x2E != 0x29
16:15:54.755 LibTeleinfo::checkLine Err checksum 0x32 != 0x2A
16:15:54.759 LibTeleinfo::checkLine Err checksum 0x4F != 0x3C
16:15:54.761 LibTeleinfo::checkLine Err checksum 0x2B != 0x23
16:15:54.768 LibTeleinfo::checkLine Err checksum 0x31 != 0x20
16:15:55.003 LibTeleinfo::checkLine Err checksum 0x5F != 0x5C
16:15:55.005 LibTeleinfo::checkLine Err checksum 0x52 != 0x38
16:15:55.007 LibTeleinfo::checkLine Err checksum 0x56 != 0x3C
16:15:55.008 LibTeleinfo::checkLine Err checksum 0x28 != 0x41
16:15:55.028 MQT: tele/TeleInfo/SENSOR = {"TIC":{"SMAXSN":5621,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"EASF03":0,"EASF08":0,"EASF09":0,"EASD04":0,"IRMS1":14,"PREF":12,"PCOUP":12,"SINSTS":3159,"SINSTI":0,"NJOURF+1":0,"VTIC":2,"EAST":71465214,"EASF05":0,"EASF06":0,"EASD01":28147111,"ERQ2":113611,"ERQ3":768785,"
16:15:55.508 LibTeleinfo: _recv_idx = 128/128 buffer overflow
16:15:55.753 LibTeleinfo::checkLine Err checksum 0x48 != 0x46
16:15:55.756 LibTeleinfo::checkLine Err checksum 0x2A != 0x25
16:15:55.758 LibTeleinfo::checkLine Err checksum 0x2E != 0x26
16:15:55.762 LibTeleinfo::checkLine Err checksum 0x40 != 0x29
16:15:55.764 LibTeleinfo::checkLine Err checksum 0x2A != 0x22
16:15:56.005 LibTeleinfo::checkLine Err checksum 0x44 != 0x20
16:15:56.007 LibTeleinfo::checkLine Err checksum 0x31 != 0x29
16:15:56.012 LibTeleinfo::checkLine Err checksum 0x5F != 0x1C
16:15:56.014 LibTeleinfo::checkLine Err checksum 0x58 != 0x52
16:15:56.253 LibTeleinfo::checkLine Err checksum 0x58 != 0x38
16:15:56.255 LibTeleinfo::checkLine Err checksum 0x4F != 0x1C
16:15:56.256 LibTeleinfo::checkLine Err checksum 0x51 != 0x22
16:15:56.258 LibTeleinfo::checkLine Err checksum 0x21 != 0x4E
16:15:56.508 LibTeleinfo::checkLine Err checksum 0x20 != 0x40
16:15:56.509 LibTeleinfo::checkLine Err checksum 0x42 != 0x26
16:15:56.770 MQT: tele/TeleInfo/SENSOR = {"TIC":{"SMAXSN":5621,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"EASF03":0,"EASF08":0,"EASF09":0,"EASD04":0,"IRMS1":14,"PREF":12,"PCOUP":12,"SINSTS":3159,"SINSTI":0,"NJOURF+1":0,"VTIC":2,"EAST":71465219,"EASF05":0,"EASF06":0,"EASD01":28147111,"ERQ2":113611,"ERQ3":768785,"
16:15:56.777 LibTeleinfo::checkLine Err checksum 0x54 != 0x4E
16:15:56.778 LibTeleinfo::checkLine Err checksum 0x58 != 0x50

sur la page Web le graphique de % de charge indique n'importe quoi, les index ont de temps en temps des caractères étranges.

Est-ce que vous pouvez me dire quel est le problème?
C'est depuis que j'ai changé le paramétrage mode historique à mode standard.

Merci pour votre aide
Samquad

[Charles]

@Samquad avez vous redémarré tasmota depuis le passage en mode standard ?

[Charles]

@Samquad

Ok problème confirmé, avez vous un script berry qui tourne par hasard ?
https://community.ch2i.eu/topic/676/tasmota/352

[Samquad]

@Charles
Oui j'ai redémarré plusieurs fois tamsota mais ça ne change rien.
Je ne sais pas ce qu'est un script "Berry"
J'ai juste compilé Tasmota sensor en sélectionnant l'ajout téléinfo pour compiler mon bin

[Charles]

@Samquad regarde ce document page 6
https://cdn.planete-domotique.com/notices/S/E/SERV_WES-2.pdf

Peut être une piste, peux tu essayer d'inverser les 2 fils téléinfo ? puis essayer le coups de la résistance pour voir ?

[Samquad]

This post is deleted!

[Samquad]

@Charles
J'ai essayé d'inverser les 2 fils et de rajouter aussi 1 résistance de 1K mais ça ne change rien , j'ai toujours des erreurs de checksum

11:48:32.266 LibTeleinfo::checkLine Err checksum 0x4A != 0x46
11:48:32.267 LibTeleinfo::checkLine Err checksum 0x57 != 0x39
11:48:32.269 LibTeleinfo::checkLine Err checksum 0x54 != 0x19
11:48:32.502 LibTeleinfo::checkLine Err checksum 0x45 != 0x2C
11:48:32.504 LibTeleinfo::checkLine Err checksum 0x23 != 0x5B
11:48:32.506 LibTeleinfo::checkLine Err checksum 0x23 != 0x2D
11:48:32.508 LibTeleinfo::checkLine Err checksum 0x35 != 0x40
11:48:32.756 LibTeleinfo: _recv_idx = 128/128 buffer overflow
11:48:33.019 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"EASF01":35216210,"EASF06":0,"EASF07":0,"EASD02":43498730,"EASD03":0,"ERQ3":778701,"ERQ4":4441649,"STGE":"003A4301","PRM":2147483647,"RELAIS":0,"NTARF":1,"NJOURF":0,"IRMS1":6,"EAST":71712893,"EASD01":28214163,"ERQ2":114822,"UMOY1":237,"NGTF":"      BASE      ","EASF03":0,"EASF08":0,"URMS1":239,"PREF":12,"NJOURF+1":0,"ADSC":"031861721681","EASF05":0,"EASF10":0,"ERQ1":4294397,"":0,"EASF09":0,"EAIT":6721189,"PCOUP":12,"+1":0,"SMAXSN":4474,"EASF04":0,"EASD04":0,"SINSTI":1511,"
11:48:33.024 LibTeleinfo::checkLine Err checksum 0x3A != 0x35
11:48:33.026 LibTeleinfo::checkLine Err checksum 0x3C != 0x36
11:48:33.028 LibTeleinfo::checkLine Err checksum 0x37 != 0x25
11:48:33.030 LibTeleinfo::checkLine Err checksum 0x2B != 0x27
11:48:33.260 LibTeleinfo::checkLine Err checksum 0x4E != 0x30
11:48:33.262 LibTeleinfo::checkLine Err checksum 0x43 != 0x3B

[Charles]

@Samquad j'ai fait quelques tests ce W.E. avec mon linky en mode standard pour voir quelles étaient les limites des résistances

Sur le schéma suivant avec

j'ai pu descendre R1 jusque 1.5K avant que ça ne commence à merder, et dans ce cas la en diminuant R3 ça revient.

Ce qui veut dire que l'on peut agir sur la sensibilité en jouant avec R1 et R3. Soit on diminue R3 soit on augmente R1. Mais comme mon linky fonctionne parfaitement avec ces valeurs difficile de voir d'ou vient le soucis chez toi. Serais-tu en mesure de changer l'une de ces deux resistances ?

[Samquad]

@Charles
Je possède le Pitinfo V1.3 (photo prise avant modif de résistance):

J'avais des erreurs checksum dans cette configuration avec le mode standard du linky.

j'ai changé les résistances comme préconisé sur le site tasmota à cette adresse:
https://tasmota.github.io/docs/Teleinfo/#optional-enable-pin

J'ai toujours des erreurs checksum
Est-ce que j'ai remplacé les bonnes résistance pour modifier mon Pitinfo en V1.3a?

J'ai soudé des résistances std car je n'ai pas de résistances cms et pas de matériel adapté.
Je peux faire des tests de changement de résistances.
Je peux plus facilement réduire R3 (en soudant une résistance en // sur celle en place qui mesure 220 ohms).
Quelle valeur faudrait-il tester?

[Charles]

@Samquad Ok je comprends mieux, oui c'est les bonnes mais R3 était déjà en 220Ohm (221) donc rien à y faire pour le moment, ce qui est intéressant c'est que R1 était en 4K7 et ça fonctionnait pas (j'allais te proposer cette conf du coups inutile), donc peut être la passer à 10K (sans garantie). En fait tu as descendu R1 et dans ton cas il faut l'augmenter.

Sinon pour faire simple tu laisses R1 à 3.3K et tu descends R3 à 100ohm si pas mieux 50ohm (enfin tu vois le principe) tu peux même la court circuiter au pire et mettre une 0 Ohm pour voir, si là ça fonctionne pas y'a un hic

tu as beaucoup de cable entre ton linky et le module ?

[Samquad]

@Charles
Entre le compteur et le Pitinfo: j'ai 30 cm de cable 0.75mm².
Je vais tester sur R3 en baissant sa valeur.
Avant de tester tu peux me confirmer que je compile correctement:

J'utilise Visual studio code avec plateformIO et les dernieres sources sur
https://tasmota.github.io/docs/PlatformIO/#download-tasmota
J'active l'option teleinfo dans le fichier my_user_config.h et je clique sur Build dans le dossier tasmota-sensors

Est-ce que tu peux m'envoyer la dernière version du firmware tasmota sensor avec téléinfo pour que j'essaye de remplacer le firmware de mon wemos mini d1?

[Charles]

@Samquad oui je pense que c'est ça, mais tu sais, tu n'as pas besoin de compiler, tu trouveras les FW téléinfo sur le site des FW non officiels ici dans le dossier firmware tu as la version teleinfo pour tous les types d'ESP (ESP32, ESP8266 et autres

Cerise sur le gateau, c'est rebuild a chaque PR mergée

[Samquad]

@Charles
Merci pour l'info sur le lien.
J'ai dessoudé R3 et la piste du circuit imprimé n'a pas résistée
J'ai soudé un fil pour rétablir la continuité vers la borne de gauche:

J'ai fait plusieurs essais:
R3 = 0 ohm j'ai ces log dans la console:

17:12:59.262 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":228,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:00.501 LibTeleinfo::checkLine Err checksum 0x3A != 0x42
17:13:01.255 LibTeleinfo::checkLine Err checksum 0x48 != 0x20
17:13:01.501 LibTeleinfo::checkLine Err checksum 0x3A != 0x42
17:13:02.260 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":229,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:02.752 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:03.756 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":229,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:04.502 LibTeleinfo::checkLine Err checksum 0x2E != 0x36
17:13:05.259 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":229,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:06.255 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:06.261 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":229,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:07.502 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:07.508 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":229,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:08.002 LibTeleinfo::checkLine Err checksum 0x2E != 0x36
17:13:08.502 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:09.257 LibTeleinfo::checkLine Err checksum 0x4D != 0x55
17:13:09.506 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":229,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:09.509 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:10.257 LibTeleinfo::checkLine Err checksum 0x2B != 0x33
17:13:12.002 LibTeleinfo::checkLine Err checksum 0x3A != 0x42
17:13:12.008 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":231,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:13.020 LibTeleinfo::checkLine Err checksum 0x24 != 0x40
17:13:13.022 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:13.256 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:14.260 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":231,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:14.502 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:13:15.005 LibTeleinfo::checkLine Err checksum 0x34 != 0x3C
17:13:15.529 MQT: tele/TeleInfo/SENSOR = {"TIC":{"VTIC":2,"NTARF":1,"URMS1":231,"RELAIS":0,"PREF":12,"PCOUP":12}}
17:13:15.752 LibTeleinfo::checkLine Err checksum 0x42 != 0x4A

R3 = 50 ohms j'ai ces log dans la console:

16:58:47.269 MQT: tele/TeleInfo/SENSOR = {"TIC":{"EAIT":6730889,"VTIC":2,"EASD02":43525417,"ERQ3":780254,"EASD03":0,"ERQ4":4447898,"IRMS1":12,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"EASF10":0,"EASF06":0,"ERQ2":115942,"EASF03":0,"URMS1":232,"PREF":12,"ADSC":"031861721681","EAST":71749392,"ERQ1":4296047,"PCOUP":12,"CCASN":2728,"SINSTS":1508,"SIAXIN)1":2791,"EASF09":0,"NJOURF+1":0,"EASF02":36496683,"EASF07":0,"EASF04":0,"EASD01":28223966,"EASF08":0,"EASF05":0,"QIOY1":234,"EASD04":0,"PRM":2147483647,"AASF01":0,"CCAIN":0,"":")1","EASF01":35252706,"
16:58:47.273 LibTeleinfo::checkLine Err checksum 0x4D != 0x53
16:58:47.503 LibTeleinfo::checkLine Err checksum 0x27 != 0x2B
16:58:47.507 LibTeleinfo: _recv_idx = 128/128 buffer overflow
16:58:47.753 LibTeleinfo::checkLine Err checksum 0x3E != 0x46
16:58:47.755 LibTeleinfo::checkLine Err checksum 0x21 != 0x25
16:58:48.003 LibTeleinfo::checkLine Err checksum 0x26 != 0x2A
16:58:48.004 LibTeleinfo::checkLine Err checksum 0x57 != 0x23
16:58:48.257 LibTeleinfo::checkLine Err checksum 0x39 != 0x41
16:58:48.259 LibTeleinfo::checkLine Err checksum 0x3E != 0x42
16:58:48.265 LibTeleinfo::checkLine Err checksum 0x37 != 0x3B
16:58:48.267 LibTeleinfo::checkLine Err checksum 0x42 != 0x3F
16:58:48.503 LibTeleinfo: _recv_idx = 128/128 buffer overflow
16:58:48.752 LibTeleinfo: _recv_idx = 128/128 buffer overflow
16:58:48.766 MQT: tele/TeleInfo/SENSOR = {"TIC":{"EAIT":6730889,"VTIC":2,"EASD02":43525417,"ERQ3":780254,"EASD03":0,"ERQ4":4447898,"IRMS1":12,"STGE":"003A4101","RELAIS":0,"NTARF":1,"NJOURF":0,"EASF10":0,"EASF06":0,"ERQ2":115942,"EASF03":0,"URMS1":232,"PREF":12,"ADSC":"031861721681","EAST":71749392,"ERQ1":4296047,"PCOUP":12,"CCASN":2728,"SINSTS":1508,"SIAXIN)1":2791,"EASF09":0,"NJOURF+1":0,"EASF02":36496683,"EASF07":0,"EASF04":0,"EASD01":28223966,"EASF08":0,"EASF05":0,"QIOY1":234,"EASD04":0,"PRM":2147483647,"AASF01":0,"CCAIN":0,"":")1","EASF01":35252706,"
16:58:49.002 LibTeleinfo::checkLine Err checksum 0x38 != 0x3C
16:58:49.256 LibTeleinfo::checkLine Err checksum 0x5E != 0x22
16:58:49.258 LibTeleinfo::checkLine Err checksum 0x56 != 0x5A
16:58:49.502 LibTeleinfo::checkLine Err checksum 0x43 != 0x55
16:58:50.002 LibTeleinfo::checkLine Err checksum 0x38 != 0x3C
16:58:50.257 LibTeleinfo::checkLine Err checksum 0x25 != 0x29
16:58:50.259 LibTeleinfo::checkLine Err checksum 0x5A != 0x22

R3 = 100 ohms j'ai ces log dans la console:

17:02:07.757 LibTeleinfo::checkLine Err checksum 0x2B != 0x20
17:02:08.005 LibTeleinfo::checkLine Err checksum 0x3B != 0x3F
17:02:08.007 LibTeleinfo::checkLine Err checksum 0x3A != 0x42
17:02:08.269 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF":0,"NJOURF+1":0,"EAIT":6730889,"SINSTS":1349,"EASD01":28223966,"EASD03":0,"ERQ4":4447916,"IRMS1":6,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EASF10":0,"EASF03":0,"ADSC":"031861721681","VTIC":2,"EAST":71749462,"ERQ1":4296047,"ERQ2":115942,"
17:02:08.503 LibTeleinfo::checkLine Err checksum 0x21 != 0x25
17:02:08.505 LibTeleinfo::checkLine Err checksum 0x26 != 0x2A
17:02:08.753 LibTeleinfo::checkLine Err checksum 0x57 != 0x23
17:02:08.755 LibTeleinfo::checkLine Err checksum 0x30 != 0x34
17:02:08.756 LibTeleinfo::checkLine Err checksum 0x3B != 0x43
17:02:09.007 LibTeleinfo::checkLine Err checksum 0x4E != 0x20
17:02:09.257 LibTeleinfo::checkLine Err checksum 0x3E != 0x42
17:02:09.513 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF":0,"NJOURF+1":0,"EAIT":6730889,"SINSTS":1361,"EASD01":28223966,"EASD03":0,"ERQ4":4447916,"IRMS1":6,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EASF10":0,"EASF03":0,"ADSC":"031861721681","VTIC":2,"EAST":71749462,"ERQ1":4296047,"ERQ2":115942,"
17:02:09.518 LibTeleinfo::checkLine Err checksum 0x4C != 0x50
17:02:09.753 LibTeleinfo::checkLine Err checksum 0x24 != 0x28
17:02:09.755 LibTeleinfo::checkLine Err checksum 0x33 != 0x3B
17:02:10.003 LibTeleinfo::checkLine Err checksum 0x53 != 0x57
17:02:10.257 LibTeleinfo::checkLine Err checksum 0x4D != 0x5D
17:02:10.753 LibTeleinfo::checkLine Err checksum 0x39 != 0x3D
17:02:10.755 LibTeleinfo::checkLine Err checksum 0x5E != 0x26
17:02:11.003 LibTeleinfo::checkLine Err checksum 0x5E != 0x22
17:02:11.007 LibTeleinfo::checkLine Err checksum 0x57 != 0x5B
17:02:11.257 LibTeleinfo::checkLine Err checksum 0x3D != 0x41
17:02:11.259 LibTeleinfo::checkLine Err checksum 0x4E != 0x3B
17:02:11.261 LibTeleinfo::checkLine Err checksum 0x2D != 0x39
17:02:11.513 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF":0,"NJOURF+1":0,"EAIT":6730889,"SINSTS":1361,"EASD01":28223966,"EASD03":0,"ERQ4":4447916,"IRMS1":6,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EASF10":0,"EASF03":0,"ADSC":"031861721681","VTIC":2,"EAST":71749462,"ERQ1":4296047,"ERQ2":115942,"
17:02:11.753 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:02:11.755 LibTeleinfo::checkLine Err checksum 0x46 != 0x4A
17:02:12.002 LibTeleinfo::checkLine Err checksum 0x44 != 0x48
17:02:12.004 LibTeleinfo::checkLine Err checksum 0x23 != 0x27
17:02:12.259 LibTeleinfo::checkLine Err checksum 0x4E != 0x52
17:02:12.263 LibTeleinfo::checkLine Err checksum 0x4C != 0x41
17:02:12.513 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF":0,"NJOURF+1":0,"EAIT":6730889,"SINSTS":1361,"EASD01":28223966,"EASD03":0,"ERQ4":4447916,"IRMS1":6,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EASF10":0,"EASF03":0,"ADSC":"031861721681","VTIC":2,"EAST":71749462,"ERQ1":4296047,"ERQ2":115942,"
17:02:12.755 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:02:13.257 LibTeleinfo::checkLine Err checksum 0x5D != 0x25
17:02:13.263 LibTeleinfo::checkLine Err checksum 0x2A != 0x2E
17:02:13.503 LibTeleinfo::checkLine Err checksum 0x3E != 0x42
17:02:13.505 LibTeleinfo::checkLine Err checksum 0x58 != 0x5C
17:02:13.507 LibTeleinfo::checkLine Err checksum 0x58 != 0x5C
17:02:13.763 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF":0,"NJOURF+1":0,"EAIT":6730889,"SINSTS":1361,"EASD01":28223966,"EASD03":0,"ERQ4":4447916,"IRMS1":6,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EASF10":0,"EASF03":0,"ADSC":"031861721681","VTIC":2,"EAST":71749462,"ERQ1":4296047,"ERQ2":115942,"
17:02:13.767 LibTeleinfo::checkLine Err checksum 0x28 != 0x39
17:02:13.769 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:02:14.002 LibTeleinfo::checkLine Err checksum 0x58 != 0x42
17:02:14.004 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:02:14.256 LibTeleinfo::checkLine Err checksum 0x2E != 0x36
17:02:14.502 LibTeleinfo::checkLine Err checksum 0x42 != 0x46
17:02:14.503 LibTeleinfo::checkLine Err checksum 0x57 != 0x5B
17:02:14.752 LibTeleinfo::checkLine Err checksum 0x38 != 0x3B
17:02:14.764 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF":0,"NJOURF+1":0,"EAIT":6730889,"SINSTS":1361,"EASD01":28223966,"EASD03":0,"ERQ4":4447916,"IRMS1":6,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EASF10":0,"EASF03":0,"ADSC":"031861721681","VTIC":2,"EAST":71749462,"ERQ1":4296047,"ERQ2":115942,"
17:02:14.768 LibTeleinfo::checkLine Err checksum 0x20 != 0x5D
17:02:15.003 LibTeleinfo::checkLine Err checksum 0x27 != 0x20
17:02:15.005 LibTeleinfo::checkLine Err checksum 0x4A != 0x4E
17:02:15.006 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
17:02:15.008 LibTeleinfo::checkLine Err checksum 0x3E != 0x42
17:02:15.267 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF":0,"NJOURF+1":0,"EAIT":6730889,"SINSTS":1361,"EASD01":28223966,"EASD03":0,"ERQ4":4447916,"IRMS1":6,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EASF10":0,"EASF03":0,"ADSC":"031861721681","VTIC":2,"EAST":71749462,"ERQ1":4296047,"ERQ2":115942,"
17:02:15.503 LibTeleinfo::checkLine Err checksum 0x24 != 0x28
17:02:15.505 LibTeleinfo::checkLine Err checksum 0x35 != 0x3D

R3 = 163 ohms j'ai ces log dans la console:

17:07:36.521 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF+1":0,"EASF02":36496683,"EASF07":0,"EASD02":43525579,"EASD03":0,"EAIT":6730889,"ERQ2":115942,"ERQ3":780254,"LTARF":"      BASE      ","EASF04":0,"EASF09":0,"EASF10":0,"URMS1":233,"PREF":12,"PCOUP":12,"SINSTS":1215,"SINSTI":0,"ADSC":"031861721681","VTIC":2,"
17:07:36.528 LibTeleinfo::checkLine Err checksum 0x56 != 0x1D
17:07:36.530 LibTeleinfo::checkLine Err checksum 0x47 != 0x3F
17:07:36.752 LibTeleinfo::checkLine Err checksum 0x50 != 0x4E
17:07:36.757 LibTeleinfo::checkLine Err checksum 0x46 != 0x42
17:07:37.002 LibTeleinfo::checkLine Err checksum 0x47 != 0x09
17:07:37.005 LibTeleinfo::checkLine Err checksum 0x4E != 0x46
17:07:37.006 LibTeleinfo::checkLine Err checksum 0x49 != 0x30
17:07:37.008 LibTeleinfo::checkLine Err checksum 0x2A != 0x24
17:07:37.256 LibTeleinfo::checkLine Err checksum 0x2F != 0x29
17:07:37.258 LibTeleinfo::checkLine Err checksum 0x32 != 0x2A
17:07:37.262 LibTeleinfo::checkLine Err checksum 0x28 != 0x01
17:07:37.264 LibTeleinfo::checkLine Err checksum 0x2B != 0x23
17:07:37.267 LibTeleinfo::checkLine Err checksum 0x25 != 0x17
17:07:37.502 LibTeleinfo::checkLine Err checksum 0x29 != 0x24
17:07:37.504 LibTeleinfo::checkLine Err checksum 0x4B != 0x33
17:07:37.506 LibTeleinfo::checkLine Err checksum 0x48 != 0x42
17:07:37.511 LibTeleinfo::checkLine Err checksum 0x44 != 0x3C
17:07:37.513 LibTeleinfo::checkLine Err checksum 0x39 != 0x55
17:07:37.752 LibTeleinfo::checkLine Err checksum 0x3B != 0x39
17:07:37.754 LibTeleinfo::checkLine Err checksum 0x54 != 0x1D
17:07:37.756 LibTeleinfo::checkLine Err checksum 0x47 != 0x3F
17:07:37.757 LibTeleinfo::checkLine Err checksum 0x47 != 0x40
17:07:37.759 LibTeleinfo::checkLine Err checksum 0x50 != 0x4E
17:07:38.004 LibTeleinfo::checkLine Err checksum 0x46 != 0x42
17:07:38.022 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF+1":0,"EASF02":36496683,"EASF07":0,"EASD02":43525579,"EASD03":0,"EAIT":6730889,"ERQ2":115942,"ERQ3":780254,"LTARF":"      BASE      ","EASF04":0,"EASF09":0,"EASF10":0,"URMS1":233,"PREF":12,"PCOUP":12,"SINSTS":1206,"SINSTI":0,"ADSC":"031861721681","VTIC":2,"
17:07:38.256 LibTeleinfo::checkLine Err checksum 0x43 != 0x3B
17:07:38.259 LibTeleinfo::checkLine Err checksum 0x2C != 0x26
17:07:38.261 LibTeleinfo::checkLine Err checksum 0x2F != 0x27
17:07:38.264 LibTeleinfo::checkLine Err checksum 0x41 != 0x28
17:07:38.502 LibTeleinfo::checkLine Err checksum 0x4E != 0x46
17:07:38.506 LibTeleinfo::checkLine Err checksum 0x21 != 0x5B
17:07:38.754 LibTeleinfo::checkLine Err checksum 0x3A != 0x39
17:07:39.255 LibTeleinfo: _recv_idx = 128/128 buffer overflow
17:07:39.257 LibTeleinfo::checkLine Err checksum 0x40 != 0x3C
17:07:39.259 LibTeleinfo::checkLine Err checksum 0x52 != 0x50
17:07:39.501 LibTeleinfo::checkLine Err checksum 0x2C != 0x24
17:07:39.505 LibTeleinfo::checkLine Err checksum 0x36 != 0x27
17:07:39.506 LibTeleinfo::checkLine Err checksum 0x31 != 0x29
17:07:39.510 LibTeleinfo::checkLine Err checksum 0x2A != 0x22
17:07:39.751 LibTeleinfo::checkLine Err checksum 0x4A != 0x10
17:07:39.753 LibTeleinfo::checkLine Err checksum 0x5A != 0x57
17:07:39.754 LibTeleinfo::checkLine Err checksum 0x2A != 0x24
17:07:39.761 LibTeleinfo::checkLine Err checksum 0x34 != 0x01
17:07:40.002 LibTeleinfo::checkLine Err checksum 0x39 != 0x5D
17:07:40.020 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF+1":0,"EASF02":36496683,"EASF07":0,"EASD02":43525581,"EASD03":0,"EAIT":6730889,"ERQ2":115942,"ERQ3":780254,"LTARF":"      BASE      ","EASF04":0,"EASF09":0,"EASF10":0,"URMS1":233,"PREF":12,"PCOUP":12,"SINSTS":1206,"SINSTI":0,"ADSC":"031861721681","VTIC":2,"
17:07:40.028 LibTeleinfo::checkLine Err checksum 0x27 != 0x20
17:07:40.030 LibTeleinfo::checkLine Err checksum 0x25 != 0x27
17:07:40.031 LibTeleinfo::checkLine Err checksum 0x47 != 0x3F
17:07:40.255 LibTeleinfo::checkLine Err checksum 0x48 != 0x42
17:07:40.504 LibTeleinfo::checkLine Err checksum 0x2E != 0x26
17:07:40.751 LibTeleinfo::checkLine Err checksum 0x43 != 0x29
17:07:40.753 LibTeleinfo::checkLine Err checksum 0x28 != 0x22
17:07:40.757 LibTeleinfo::checkLine Err checksum 0x36 != 0x2E
17:07:41.001 LibTeleinfo::checkLine Err checksum 0x5D != 0x30
17:07:41.003 LibTeleinfo::checkLine Err checksum 0x5F != 0x1C
17:07:41.005 LibTeleinfo::checkLine Err checksum 0x4E != 0x4A
17:07:41.007 LibTeleinfo::checkLine Err checksum 0x21 != 0x41
17:07:41.008 LibTeleinfo::checkLine Err checksum 0x57 != 0x20
17:07:41.010 LibTeleinfo::checkLine Err checksum 0x43 != 0x3B
17:07:41.255 LibTeleinfo::checkLine Err checksum 0x5D != 0x20
17:07:41.257 LibTeleinfo::checkLine Err checksum 0x41 != 0x27
17:07:41.519 MQT: tele/TeleInfo/SENSOR = {"TIC":{"NJOURF+1":0,"EASF07":0,"EASD02":43525581,"EASD03":0,"EAIT":6730889,"ERQ2":115942,"ERQ3":780254,"LTARF":"      BASE      ","EASF04":0,"EASF09":0,"EASF10":0,"URMS1":233,"PREF":12,"PCOUP":12,"SINSTS":1206,"SINSTI":0,"ADSC":"031861721681","VTIC":2,"
17:07:41.526 LibTeleinfo::checkLine Err checksum 0x50 != 0x4A
17:07:41.751 LibTeleinfo::checkLine Err checksum 0x44 != 0x3C
17:07:41.753 LibTeleinfo::checkLine Err checksum 0x4E != 0x46
17:07:41.755 LibTeleinfo::checkLine Err checksum 0x35 != 0x25
17:07:41.757 LibTeleinfo::checkLine Err checksum 0x2D != 0x27
17:07:41.760 LibTeleinfo::checkLine Err checksum 0x44 != 0x28
17:07:42.002 LibTeleinfo::checkLine Err checksum 0x4E != 0x46
17:07:42.006 LibTeleinfo::checkLine Err checksum 0x58 != 0x52
17:07:42.256 LibTeleinfo::checkLine Err checksum 0x55 != 0x39
17:07:42.258 LibTeleinfo::checkLine Err checksum 0x5B != 0x5D

R3 = 50 Ohms est la résistance qui me donne la trame la plus longue.
Elle reste quand même incomplète.
Est-ce que le buffer est assez grand pour traiter la trame TIC?
Mon compteur est censé me renvoyer le P index injection mais je ne le vois pas.

[Charles]

@Samquad Ah la vache tu ne rigoles pas avec les soudures, joli travail.

Bon ça semble mieux déjà, tu as bien pris la dernière version dispo dans tasmota special ?

Comme la trame n'est pas lue correctement du coups le buffer de ligne (taille maximale d'une ligne et pas d'une trame) ne voit pas la fin de ligne et continue d'écrire dedans, d'ou la saturation à 128.

C'est dommage que ce ne soit pas un ESP32 on aurait pu essayer simplement le programme de test que j'ai mis dans les exemples de la libteleinfo mais avec l'ESP8266 le debug c'est ingérable (une seule uart).

Question bête ton tasmota n'aurait pas un DS18B20 de connecté et à gérer aussi ?

[Samquad]

@Charles
J'ai téléchargé le firmware ici que j'ai installé.

J'ai effectivement une sonde de température DS18B20 de branchée.

Sur mon Wemos mini D1 j'ai plusieurs sondes:
1 module Pitinfo
1 sonde de température DS18b20 (sonde extérieure)
1 capteur d'impulsion (compteur d'eau)
1 relais shield pilotage (chauffe eau)

Configuration du module:

J'avais cette déjà cette configuration en mode historique et ça fonctionnait très bien. téléinfo déconne depuis que j'ai basculé sur le mode standard

[Charles]

@Samquad ok FW correct.

Yes mais en mode standard ça transmet 8 fois plus vite (donc 8 fois plus d'info) et les timings du DS18B20 sont assez gourmands. Tu pourrais juste désactiver toutes les autres fonctions pour voir ?

[Samquad]

@Charles
J'ai tout désactivé sauf teleinfo:

J'ai toujours des erreurs de checksum

[Samquad]

Le log

18:58:34.502 LibTeleinfo::checkLine Err checksum 0x36 != 0x3F
18:58:34.752 LibTeleinfo: _recv_idx = 128/128 buffer overflow
18:58:34.764 MQT: tele/TeleInfo/SENSOR = {"TIC":{"EASF04":0,"EASF09":0,"PREF":12,"PCOUP":12,"SINSTS":3584,"NJOURF+1":0,"VTIC":2,"EASF02":36496683,"EASF07":0,"IRMS1":16,"URMS1":223,"EASF03":0,"ADSC":"031861721681","EAST":71752696,"ERQ1":4296047,"SINSTI":0,"CCAIN":0,"EASD03":0,"ERQ4":4448209,"NJOURF":0,"EASD04":0,"EASD02":43528684,"ERQ3":780254,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EAIT":6730889,"EASF08":0,"EASF01":35256000,"EASF06":0,"ERQ2":115942,"EASF05":0,"EASD01":28223966,"PRM":2147483647,"CCASN":1056}}
18:58:34.767 LibTeleinfo::checkLine Err checksum 0x46 != 0x4A
18:58:34.769 LibTeleinfo::checkLine Err checksum 0x36 != 0x3C
18:58:34.771 LibTeleinfo::checkLine Err checksum 0x3E != 0x46
18:58:35.002 LibTeleinfo::checkLine Err checksum 0x21 != 0x25
18:58:35.004 LibTeleinfo::checkLine Err checksum 0x26 != 0x2A
18:58:35.256 LibTeleinfo::checkLine Err checksum 0x57 != 0x23
18:58:35.260 LibTeleinfo::checkLine Err checksum 0x3A != 0x42
18:58:35.262 LibTeleinfo::checkLine Err checksum 0x3E != 0x42
18:58:35.263 LibTeleinfo::checkLine Err checksum 0x58 != 0x5C
18:58:35.266 LibTeleinfo::checkLine Err checksum 0x38 != 0x3C
18:58:35.502 LibTeleinfo::checkLine Err checksum 0x43 != 0x29
18:58:35.504 LibTeleinfo::checkLine Err checksum 0x37 != 0x3F
18:58:35.752 LibTeleinfo::checkLine Err checksum 0x3A != 0x42
18:58:35.753 LibTeleinfo::checkLine Err checksum 0x4A != 0x4E
18:58:36.002 LibTeleinfo::checkLine Err checksum 0x4C != 0x50
18:58:36.256 LibTeleinfo::checkLine Err checksum 0x26 != 0x2A
18:58:36.258 LibTeleinfo::checkLine Err checksum 0x57 != 0x23
18:58:36.502 LibTeleinfo::checkLine Err checksum 0x22 != 0x41
18:58:36.504 LibTeleinfo::checkLine Err checksum 0x3A != 0x3B
18:58:36.752 LibTeleinfo::checkLine Err checksum 0x23 != 0x2B
18:58:43.516 LibTeleinfo: _recv_idx = 128/128 buffer overflow
18:58:43.518 LibTeleinfo::checkLine Err checksum 0x50 != 0x41
18:58:43.519 LibTeleinfo::checkLine Err checksum 0x38 != 0x3B
18:58:43.752 LibTeleinfo::checkLine Err checksum 0x5A != 0x3F
18:58:44.002 LibTeleinfo: _recv_idx = 128/128 buffer overflow
18:58:44.013 MQT: tele/TeleInfo/SENSOR = {"TIC":{"EASF04":0,"EASF09":0,"PREF":12,"PCOUP":12,"SINSTS":3532,"NJOURF+1":0,"VTIC":2,"EASF02":36496683,"EASF07":0,"IRMS1":16,"URMS1":223,"EASF03":0,"ADSC":"031861721681","EAST":71752696,"ERQ1":4296047,"SINSTI":0,"CCAIN":0,"EASD03":0,"ERQ4":4448209,"NJOURF":0,"EASD04":0,"EASD02":43528684,"ERQ3":780254,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EAIT":6730889,"EASF08":0,"EASF01":35256000,"EASF06":0,"ERQ2":115942,"EASF05":0,"EASD01":28223966,"PRM":2147483647,"CCASN":1056}}
18:58:44.017 LibTeleinfo::checkLine Err checksum 0x38 != 0x3C
18:58:44.258 LibTeleinfo::checkLine Err checksum 0x25 != 0x29
18:58:44.502 LibTeleinfo::checkLine Err checksum 0x5A != 0x22
18:58:44.504 LibTeleinfo::checkLine Err checksum 0x4E != 0x56
18:58:44.752 LibTeleinfo::checkLine Err checksum 0x3F != 0x20
18:58:45.002 LibTeleinfo::checkLine Err checksum 0x39 != 0x29
18:58:45.004 LibTeleinfo::checkLine Err checksum 0x3B != 0x3F
18:58:45.005 LibTeleinfo::checkLine Err checksum 0x3A != 0x42
18:58:45.256 LibTeleinfo::checkLine Err checksum 0x20 != 0x24
18:58:45.502 LibTeleinfo::checkLine Err checksum 0x25 != 0x29
18:58:45.504 LibTeleinfo::checkLine Err checksum 0x57 != 0x23
18:58:45.754 LibTeleinfo::checkLine Err checksum 0x37 != 0x3B
18:58:46.012 MQT: tele/TeleInfo/SENSOR = {"TIC":{"EASF04":0,"EASF09":0,"PREF":12,"PCOUP":12,"SINSTS":3532,"NJOURF+1":0,"VTIC":2,"EASF02":36496683,"EASF07":0,"IRMS1":16,"URMS1":223,"EASF03":0,"ADSC":"031861721681","EAST":71752696,"ERQ1":4296047,"CCAIN":0,"EASD03":0,"ERQ4":4448209,"NJOURF":0,"EASD04":0,"EASD02":43528684,"ERQ3":780254,"STGE":"003A4101","RELAIS":0,"NTARF":1,"EAIT":6730889,"EASF08":0,"EASF01":35256000,"EASF06":0,"ERQ2":115942,"EASF05":0,"EASD01":28223966,"PRM":2147483647,"CCASN":1056,"SINSTI":"8SMAXIN","":"1"}}
18:58:46.016 LibTeleinfo::checkLine Err checksum 0x42 != 0x3A
18:58:46.256 LibTeleinfo: _recv_idx = 128/128 buffer overflow
18:58:46.258 LibTeleinfo: _recv_idx = 128/128 buffer overflow
18:58:46.260 LibTeleinfo::checkLine Err checksum 0x35 != 0x39
18:58:46.502 LibTeleinfo::checkLine Err checksum 0x22 != 0x26
18:58:46.752 LibTeleinfo::checkLine Err checksum 0x5E != 0x22
18:58:46.754 LibTeleinfo::checkLine Err checksum 0x26 != 0x2E
18:58:47.002 LibTeleinfo::checkLine Err checksum 0x37 != 0x3B
18:58:47.004 LibTeleinfo::checkLine Err checksum 0x42 != 0x3A
18:58:47.256 LibTeleinfo: _recv_idx = 128/128 buffer overflow
18:58:47.502 LibTeleinfo: _recv_idx = 128/128 buffer overflow

[Charles]

@Samquad c'est pas beaucoup mieux tu n'as que ça de branché sur ta sortie téléinfo du linky ?

La je ne sais plus trop quoi faire, tu es bien le premier à avoir ce soucis et sans pouvoir reproduire le soucis ou voir les signaux à l'oscillo je suis à court d'idée.

Peut être juste un programme de basic de test avec le Wemos (juste lire la serial et l'afficher) mais je ne suis pas certain qu'on ne verrait pas les mêmes erreurs.

Faudrait que j'arrive à trouver un linky avec le même soucis dans mon entourage.

[Samquad]

@Charles
J'ai un ESP32 sous la main: ce modèle

Est-ce que ça peut faciliter l'analyse avec le programme de test?

Par contre je suis pas mal novice dans le câblage et la programmation.
il faudrait m'indiquer quoi brancher où pour faire le test et comment programmer ce module esp32 et avec quel firmware.

Ca m'intéresse fortement si on peut faire fonctionner le module

Avant de tester avec un ESP32, je vais remplacer le câble de liaison entre le le compteur et le module au cas où le problème soit lié à des parasites. Je vais mettre un cable avec un blindage. Je te tiens au courant.