@Charles Trouvé!
Je ne sais pas pourquoi, mais flasher sur FireFox (142.0.1 (aarch64, Raspberry pi) ne marche pas pour moi. Changer sur Chromium (Version 142.0.7444.175) et ca marche. Une fois terminé, Firefox peut gerer, a permiere vue, mais je reste sur Chromum our l'instant.
En passant, pour moi, le DNS semble figé sur Amazon US (16.100.251.63), et NTP sur ntp.org...
Charles, merci beaucoup pour l'assistance!
Tony
@Charles > J'ai flasher, en OTA, avec succes https://github.com/NicolasBernaerts/tasmota/raw/master/teleinfo/binary/tasmota32-teleinfo-denkyd4.bin.
Mais tjrs pas de valeurs TIC
"Time": "2025-12-03T17:33:21",
"ENERGY": {
"TotalStartTime": "2025-11-28T12:26:41",
"Total": 0,
"Yesterday": 0,
"Today": 0,
"Period": 0,
"Power": 0,
"Current": 0
},
"TIC": {}
}
En plus, ou bien la cause, je ne trouve pas comment acceder la page config Teleinfo?
Tony
Bonjour Charles,
Comment acceder la page config de Teleinfo?
Ci-joint ma page config pour "Configure Module"
...et "Config Other"
Tony
@Charles, thanks for replying. Unfortunately, I'm not onsite currently, so can't change the potentiometer. The blue light was illuminated, but I thought with a different pattern to the Denky connected in Historique mode. Just my impresssion though...
Hope all relevant information is included below.
One more info: In all my attempts to get this working, I did try swapping the two Denky units (reconfiguring eachtime), and that did not seem to resolve the issue. I didn't keep logs for that test though...
Thanks,
Tony
Info as requested:
{"NAME":"Denky D4 (v1.3a)","GPIO":[32,3200,0,3232,1,0,0,0,0,1,1376,1,0,0,0,0,0,640,608,0,0,0,0,0,0,0,5632,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1}
Current auto-configuration : Current configuration: DenkyD4 V1.3a
[Console at restart:]
00:00:00.003 HDW: ESP32-PICO-V3-02 (PSRAM)
00:00:00.039 UFS: FlashFS mounted with 4392 kB free
00:00:00.059 CFG: Loaded from File, Count 22
00:00:00.069 QPC: Count 1
00:00:00.075 I2C: Bus1 using GPIO22(SCL) and GPIO21(SDA)
00:00:00.155 BRY: Berry initialized, RAM used=3933 bytes
00:00:00.219 CFG: Energy loaded from file
00:00:00.220 NRG: Init driver 15
00:00:00.230 Project tasmota - Tasmota Version 13.1.0.1(teleinfo)-2_0_11(2023-08-15T09:04:21)
00:00:00.232 TIC: RX on GPIO8, baudrate 1200
00:00:00.513 BRY: Successfully loaded 'autoexec.be'
00:00:01.305 WIF: Connecting to AP1 Breaghva Channel 5 BSSId XX:XX:XX:XX:XX:XX in mode 11n as AV-AJD-Power-1032...
00:00:02.293 WIF: Connected
00:00:02.551 HTP: Web server active on AV-AJD-Power-1032 with IP address 192.168.1.138
14:47:52.545 MQT: Attempting connection...
14:47:52.615 MQT: Connected
14:47:52.619 MQT: AV/AJD_Power/LWT = Online (retained)
14:47:52.623 MQT: AV/AJD_Power/cmnd/POWER =
14:47:52.627 MQT: AV/AJD_Power/INFO1 = {"Info1":{"Module":"Denky D4 (v1.3a)","Version":"13.1.0.1(teleinfo)","FallbackTopic":"cmnd/AV_AJD_fb/","GroupTopic":"AV/AJD_Power/cmnd/"}}
14:47:52.642 MQT: AV/AJD_Power/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"AV-AJD-Power-1032","IPAddress":"192.168.1.138","IP6Global":"","IP6Local":"fe80::4e75:25ff:fef3:6408"}}
14:47:52.655 MQT: AV/AJD_Power/INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":13}}
14:47:52.669 MQT: AV/AJD_Power/RESULT = {"POWER":"ON"}
14:47:52.670 MQT: AV/AJD_Power/POWER = ON
14:47:55.914 QPC: Reset
14:47:56.914 MQT: AV/AJD_Power/STATE = {"Time":"2025-12-01T14:47:56","Uptime":"0T00:00:08","UptimeSec":8,"Heap":125,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"Berry":{"HeapUsed":3,"Objects":46},"POWER":"ON","Dimmer":10,"Color":"1A1A1A","HSBColor":"0,0,10","Channel":[10,10,10],"Scheme":0,"Width":1,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"Breaghva","BSSId":"XX:XX:XX:XX:XX:XX","Channel":5,"Mode":"11n","RSSI":36,"Signal":-82,"LinkCount":1,"Downtime":"0T00:00:03"}}
14:47:56.964 MQT: AV/AJD_Power/SENSOR = {"Time":"2025-12-01T14:47:56","ENERGY":{"TotalStartTime":"2025-11-28T12:26:41","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":0,"Current":0.000},"TIC":{}}
SENSOR = {"Time":"2025-12-01T15:05:05","ENERGY":{"TotalStartTime":"2025-11-28T12:26:41","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":0,"Current":0.000},"TIC":{}}
Hi Charles,
I've just installed 2 x Denky4 (v1.3a), one to a Linky in mode "Historique", and one to a different Linky in mode "Standard". These are to replace 2 existing Micro Teleinfo units which worked fine but I wanted to move to Tasmota. The mode Historique monitor on Linky #1 works perfectly, correct and consistent.
But, the installation on the Standard mode on Linky #2 is not working. I believe the physical connection to the Linky is correct, and Wi-fi, MQTT work fine. No TIC monitoring data is being produced {}. No "SENSOR" records are generated. What am I doing wrong?
Thanks,
Tony
@ellipsis Making progress on this, but I should have asked where is the best document or link for installation of Denky 4 with Raspberry Pi? I see many fragments on various sites, but cannot find an up to date document. English or French are fine for me.
Thanks again
@Charles My misunderstanding. Will pursue Tasmota/MQTT option. Thanks very much for your help here!
Tony
@Charles Hellon again. I received and connected a Denky D4 unit to my pi4 and 3-phase meter (flashing blue LED, so I assume correctly).
I'm struggling to make the software connections work. I think this is because I have not found the correct instructions document for installation, so I'm blundering around somewhat.
Current symptom: cannot see tty connection with picocom.
Serial port is enabled, serial console disabled, cmdline.txt is as follows:
console=tty1 root=PARTUUID=252dbefd-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
dmesg seems fine:
[ 2.577377] usb 1-1.4: New USB device found, idVendor=1a86, idProduct=55d4, bcdDevice= 4.43
[ 2.577414] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[ 2.577435] usb 1-1.4: Product: USB Single Serial
[ 2.577453] usb 1-1.4: SerialNumber: 54AD000834
Thanks for any help
@Charles Thanks for confirming - will order asap.
FYI, there is a broken link you may want to fix... https://github.com/hallard/LibTeleinfo/blob/master/examples/Raspberry_JSON/Raspberry_JSON.ino
Thanks!
Hi Charles (better to write in my native language, I guess)
I have 2 Linky in different properties in France, one 3-phase, one sigle phase. I have some capabilities in Raspberry Pi/Python/MQTT, and today I use clamps to measure electricity consumption. I want to move to Teleinfo for this data
I think I want to buy 2x Denky, but I wanted to confirm this option, if I may.
I assume I will set up each using the default software, and then examine development options to (in parallel?) send the data via MQTT to my own RPi4 Pi server.
Questions:
Thanks for any/all help!