Je ne sais pas pourquoi, mais flasher sur FireFox (142.0.1 (aarch64, Raspberry pi) ne marche pas pour moi. Changer sur Chromium (Version 142.0.7444.175) et ca marche. Une fois terminé, Firefox peut gerer, a permiere vue, mais je reste sur Chromum our l'instant.

En passant, pour moi, le DNS semble figé sur Amazon US (16.100.251.63), et NTP sur ntp.org...

Charles, merci beaucoup pour l'assistance!

Tony

mais moi en bas il m'indique que c'est la version de Nicolas, pas toi ? Jamais vu tes menus on line store, t'es certain d'avoir flashé la bonne version avec le bon processus ?

OTA : aller dans Firmware Upgrade puis cliquer sur le bouton Choisir un fichier et choisir le fichier telechargé, puis cliquer sur start upgrade

Mais tjrs pas de valeurs TIC
"Time": "2025-12-03T17:33:21",
"ENERGY": {
"TotalStartTime": "2025-11-28T12:26:41",
"Total": 0,
"Yesterday": 0,
"Today": 0,
"Period": 0,
"Power": 0,
"Current": 0
},
"TIC": {}
}

En plus, ou bien la cause, je ne trouve pas comment acceder la page config Teleinfo?

Tony

cf https://community.ch2i.eu/topic/1450/procedure-de-flash-du-firmware-denky-d4

https://github.com/NicolasBernaerts/tasmota/tree/master/teleinfo

puis utiliser ce fichier
https://github.com/NicolasBernaerts/tasmota/blob/master/teleinfo/binary/tasmota32-teleinfo-denkyd4.bin

Ci-joint ma page config pour "Configure Module"

...et "Config Other"

Tony

Et de la config du module

Hope all relevant information is included below.

One more info: In all my attempts to get this working, I did try swapping the two Denky units (reconfiguring eachtime), and that did not seem to resolve the issue. I didn't keep logs for that test though...

Thanks,

Tony

Info as requested:

{"NAME":"Denky D4 (v1.3a)","GPIO":[32,3200,0,3232,1,0,0,0,0,1,1376,1,0,0,0,0,0,640,608,0,0,0,0,0,0,0,5632,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1}

Current auto-configuration : Current configuration: DenkyD4 V1.3a

[Console at restart:] 
00:00:00.003 HDW: ESP32-PICO-V3-02 (PSRAM)
00:00:00.039 UFS: FlashFS mounted with 4392 kB free
00:00:00.059 CFG: Loaded from File, Count 22
00:00:00.069 QPC: Count 1
00:00:00.075 I2C: Bus1 using GPIO22(SCL) and GPIO21(SDA)
00:00:00.155 BRY: Berry initialized, RAM used=3933 bytes
00:00:00.219 CFG: Energy loaded from file
00:00:00.220 NRG: Init driver 15
00:00:00.230 Project tasmota - Tasmota Version 13.1.0.1(teleinfo)-2_0_11(2023-08-15T09:04:21)
00:00:00.232 TIC: RX on GPIO8, baudrate 1200
00:00:00.513 BRY: Successfully loaded 'autoexec.be'
00:00:01.305 WIF: Connecting to AP1 Breaghva Channel 5 BSSId XX:XX:XX:XX:XX:XX in mode 11n as AV-AJD-Power-1032...
00:00:02.293 WIF: Connected
00:00:02.551 HTP: Web server active on AV-AJD-Power-1032 with IP address 192.168.1.138
14:47:52.545 MQT: Attempting connection...
14:47:52.615 MQT: Connected
14:47:52.619 MQT: AV/AJD_Power/LWT = Online (retained)
14:47:52.623 MQT: AV/AJD_Power/cmnd/POWER = 
14:47:52.627 MQT: AV/AJD_Power/INFO1 = {"Info1":{"Module":"Denky D4 (v1.3a)","Version":"13.1.0.1(teleinfo)","FallbackTopic":"cmnd/AV_AJD_fb/","GroupTopic":"AV/AJD_Power/cmnd/"}}
14:47:52.642 MQT: AV/AJD_Power/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"AV-AJD-Power-1032","IPAddress":"192.168.1.138","IP6Global":"","IP6Local":"fe80::4e75:25ff:fef3:6408"}}
14:47:52.655 MQT: AV/AJD_Power/INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":13}}
14:47:52.669 MQT: AV/AJD_Power/RESULT = {"POWER":"ON"}
14:47:52.670 MQT: AV/AJD_Power/POWER = ON
14:47:55.914 QPC: Reset
14:47:56.914 MQT: AV/AJD_Power/STATE = {"Time":"2025-12-01T14:47:56","Uptime":"0T00:00:08","UptimeSec":8,"Heap":125,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"Berry":{"HeapUsed":3,"Objects":46},"POWER":"ON","Dimmer":10,"Color":"1A1A1A","HSBColor":"0,0,10","Channel":[10,10,10],"Scheme":0,"Width":1,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"Breaghva","BSSId":"XX:XX:XX:XX:XX:XX","Channel":5,"Mode":"11n","RSSI":36,"Signal":-82,"LinkCount":1,"Downtime":"0T00:00:03"}}
14:47:56.964 MQT: AV/AJD_Power/SENSOR = {"Time":"2025-12-01T14:47:56","ENERGY":{"TotalStartTime":"2025-11-28T12:26:41","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":0,"Current":0.000},"TIC":{}}

SENSOR = {"Time":"2025-12-01T15:05:05","ENERGY":{"TotalStartTime":"2025-11-28T12:26:41","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0,"Power":0,"Current":0.000},"TIC":{}}

Then may be seeing screenshot of Tasmota device config and teleinfo config may help, but should be okay if you suceeded with legacy mode.

Charles