J'ai acheté un PitInfo 1.5 que j'ai branché sur mon Arduino Uno et sur ma TIC afin d'exploiter les données de mon Linky en mode standard.
Je reçois bien des données mais elles semblent incohérentes / mal interprété par la librairie LibTeleInfo.
J'ai suivi les infos du site https://hallard.me/pitinfov12-light/, j'ai connecté le TX du pitinfo sur le port 3.
Depuis Arduino IDE, je me suis appuyé sur l'exemple de LibTeleInfo Arduino_Softserial_Blink.
Dans mon serial monitor, il m'affiche que les frame sont toujours les mêmes.
quand j'affiche les Frames, j'obtiens cela :

107874798582709484893813107874798582704349948489661310807479858270434994848484852484849324854484852484850325050484852484849327879788584737669327879788584737669327879788584737669327879788584737669327879788584737669327879788584737669327879788584737669327879788584737669946133210656883679485149575554485051575150958131086847367948509741310686584699725053485148544954484848509958131078718470932323232328469778079323232323232970131076846582709323232327280323266766985323232329431310696583849485449525154535349946131069658370484994849575355505755499751310696583704850948515155544856574897113106965837048519484850525656485654972131069658370485294848515355525250579711310696583704853948484952565049515095913106965837048549484848535356485251964131069658370485594848484848484848489401310696583704856948484848484848484894113106965837048579484848484848484213106965837049484848484848489341310696583684894849535054574969131069658368509505656495651965106965836848519485649494957968106965836848529485749495349962107382778349948485048131073828350948484713107382775194849949108582778349950519641085827783509515066131085827751951539701080826970949539131080677980953995131083738384948485454988108373788384834994848554991310837378838350484853577013108373788384519485051549131083776588837897253484854525148519485250579131083776583784995053514854485054569515056913108377658378972504851484950505255950564995210837765888351950535148544851504848485355514413108377658883784597253485153485150524948575251993108377658883784549972534851534851554894852485677131083778883504597250485153494955539484855579013108377658883514549725048514848515052948535648913106767657895053485154494848489485452913106767658345497250535148545351484894957569131085777949950534848545448484895149913108577795097250485154494848489505194610857779899725348515449484848950539491083847169948516567484991310778349980653268693232323232323277838371693232323232323291310808277957514849575553565049913108269766573948489661078846582704850979107874798570948938107874798570439489661080747985827043499484852484932484848484850505048524849327878858473693279788473693278788584766978797885847669787978847376327879788473693279788473766978797884736991332106568836794851495755544850515751509581310868473679485097413106865846997250534851485449544848485199591310787184709323232323284697780793232323232329701310768465827093232323272803232667669853232323294313106965838494854495251545353499461310696583704849948495753555057554997513106965837048509485151555448565748971131069658370485194848505256564856549721310696583704852948485153555252505797113106965837048539484952564951505913106965837048484853565251641310696583705594848484848401310696583704856948484848489411069658370579484848484848913106965837094848484848483413106965836894953505457499691069658368485049564951496513106965834851948564954575696810696583684848574949514996210738277839509131073827783948489131073827783948499131085827749519641085827783505051966108582778351951537013108082709495369131080677985539513108373788483955549131083737883844994852569131083737883845094848539701083737883848394857701310837765888372534848545251484857505791310837765884995053514848515054569485691310837765837850725053514849505052554850565691083776583789725348485453515048953515513108377658883784597250484853515350529485299310837765888378494995053484848515548948505256913108377658883785049950534848535353951485791310837765887851499725348515348515052494853564879131067676583789505348485454484848545291310676765784549725048515449534848948499371085777989499505351485454484895051943108577895072505351484954484895051913108577519505351484954484895053913108384716994849516752489821310778349965833269323232323232323269836571693232323232329608277495748524957555352509611310826973834848966131078848270485091078747982709489131078747982704394896610807479827049948484852484948544852485032504848327878857376327879787669787985847369327878857376327879787369327978847369327879788473693279788584766946133
2s	FRAME -> SAME AS PREVIOUS
DATA
0 - =
21065688367948514957555448505157515095813108684736794850974131068658469972505348514854495448484853996113107871847093232323232846977807932323232323297013107684658270932323232728032326676698532323232943131069658384948544952515453535094713106965837048499484957535550575549975131069658370485094851515554485657499721310696583704851948485052565648565497213106965837048529484851535552525057971131069658370485394848495256504950913106965837054484853534852964131069658370489484848484891310696583705694848484848484113106570489484848484848942106965834948484848484893410696583684994852545757969106965836848509565649514965131069658368514848494957968131069656848948485749495150631310738277834994850913107382778394848947107382778351948494913108549950499131085827750950511310858277519505391310808269495391310806779859499510837378838483484856569901083737883848348535396813108378848394848535770108378838451948505168108377658883787253484854525148519485250967131083658883789725348515448505456948566013108377658378972534851545050505294850564952131083778883519505351484853515048948534413108377658883784997253484853515350499525193131083776588837845497250485148485155489525691310837765888378504995053514853564994848559901083776588837845497250485148535153948545697910676765837895053514849544848489575269131067678378499725348485453514848948494956371310857789497250535148495448484895149913108577798950972504851544948484895051985798997253485154494848489515349131083847169495167524991310778349980836869323232323232776983657169323232323232913108082779495148524954535652499131082697665484866131078848270950910787479858294893810787479858243494848661310807485824349484848483248544852485032504852484879788473763278788576327878857376693278788573766932797885737632787885737669787973693279788473769463

Je vous joins mon code source.
Est-ce qu'il y a quelque chose à modifier pour que le mode standard fonctionne ?

Merci !
Sébastien

#include <string.h>
#include <SoftwareSerial.h>
#include "LibTeleinfo.h"

/****************************** Defines *******************************/

/****************************** Constants *****************************/
#define TIC_RX_PIN      3
#define TIC_TX_PIN      4

#define LEDPIN 13

// Pour clignotement LED asynchrone
unsigned long blinkLed  = 0;
uint8_t       blinkDelay= 0;

const char HEURES_PLEINES_JOUR_ROUGE[8] = "HPJR";
const char HEURES_CREUSES_JOUR_ROUGE[8] = "HCJR";
const char HEURES_PLEINES_JOUR_BLANC[8] = "HPJW";
const char HEURES_CREUSES_JOUR_BLANC[8] = "HCJW";
const char HEURES_PLEINES_JOUR_BLEU[8]  = "HPJB";
const char HEURES_CREUSES_JOUR_BLEU[8]  = "HCJB";

const char PERIODE_TARIFAIRE[8] = "NGTF";

const int PIN_RELAIS_CIRCULATEUR_RADIATEURS = 5;
const int PIN_RELAIS_PAC = 6;
const int PIN_RELAIS_CIRCULATEUR_PLANCHER_CHAUFFANT = 7;

/************************* Global variables ***************************/




/************************* Object instanciation ***********************/
SoftwareSerial Serial10(TIC_RX_PIN, TIC_TX_PIN);
TInfo tinfo;

/****************************  Routines  ******************************/
void activerChauffage()
{
  Serial.println(F("ACTIVATION chauffage !"));
  digitalWrite(PIN_RELAIS_CIRCULATEUR_RADIATEURS, LOW);
  digitalWrite(PIN_RELAIS_CIRCULATEUR_PLANCHER_CHAUFFANT, LOW);
  digitalWrite(PIN_RELAIS_PAC, LOW);
}

void desactiverChauffage()
{
  Serial.println(F("DESACTIVATION chauffage !"));
  digitalWrite(PIN_RELAIS_CIRCULATEUR_RADIATEURS, HIGH);
  digitalWrite(PIN_RELAIS_CIRCULATEUR_PLANCHER_CHAUFFANT, HIGH);
  digitalWrite(PIN_RELAIS_PAC, HIGH);
}

 /* ======================================================================
Function: printUptime 
Purpose : print pseudo uptime value
Input   : -
Output  : - 
Comments: compteur de secondes basique sans controle de dépassement
          En plus SoftwareSerial rend le compteur de millis() totalement
          A la rue, donc la precision de ce compteur de seconde n'est
          pas fiable du tout, dont acte !!!
====================================================================== */
void printUptime(void)
{
  Serial.print(millis()/1000);
  Serial.print(F("s\t"));
}

/******************************  Setup  *******************************/
void setup()
  {
    // Configure Teleinfo Soft serial 
    Serial.println(F("Set Baud"));
    Serial.begin(115200);
    Serial.print(F("TIC RX = "));
    Serial.println(TIC_RX_PIN);
    Serial10.begin(9600);

    // Init teleinfo
    tinfo.init();

    // Attacher les callbacks dont nous avons besoin
    tinfo.attachADPS(ADPSCallback);
    tinfo.attachData(DataCallback);
    tinfo.attachNewFrame(NewFrame);
    tinfo.attachUpdatedFrame(UpdatedFrame);

    pinMode(PIN_RELAIS_CIRCULATEUR_RADIATEURS, OUTPUT);
    pinMode(PIN_RELAIS_CIRCULATEUR_PLANCHER_CHAUFFANT, OUTPUT);
    pinMode(PIN_RELAIS_PAC, OUTPUT);

    printUptime();
    Serial.println(F("PROGRAM STARTED"));
  }

/****************************** Processing ****************************/
void DataCallback(ValueList * me, uint8_t  flags)
{
  Serial.println(F(""));
  printUptime();

  Serial.println(F("New data"));  
  if (flags & TINFO_FLAGS_ADDED) 
    Serial.print(F("NEW -> "));

  if (flags & TINFO_FLAGS_UPDATED)
    Serial.print(F("MAJ -> "));

  // Display values
  Serial.println(F("DATA"));
  Serial.print(me->ts);
  Serial.print(" - ");
  Serial.print(me->name);
  Serial.print("=");
  Serial.println(me->value);

  if (strcmp(me->name, PERIODE_TARIFAIRE) == 0)
  {
    Serial.print(F("Période tarifaire = "));
    Serial.println(me->value);
    if (strcmp(me->value, HEURES_PLEINES_JOUR_ROUGE) == 0)
      desactiverChauffage();
    else
      activerChauffage();
  }
  if ((strcmp(me->name, "SINSTS1") == 0) || (strcmp(me->name, "SINSTS2") == 0) || (strcmp(me->name, "SINSTS3") == 0))
  {
    Serial.print(F("Puissance app. Instantanée soutirée ("));
    Serial.print(me->name);
    Serial.print(F(") = "));
    Serial.println(me->value);
  }
}

/* ======================================================================
Function: ADPSCallback 
Purpose : called by library when we detected a ADPS on any phased
Input   : phase number 
            0 for ADPS (monophase)
            1 for ADIR1 triphase
            2 for ADIR2 triphase
            3 for ADIR3 triphase
Output  : - 
Comments: should have been initialised in the main sketch with a
          tinfo.attachADPSCallback(ADPSCallback())
====================================================================== */
void ADPSCallback(uint8_t phase)
{
  Serial.println(F(""));
  printUptime();

  // Monophasé
  if (phase == 0 ) {
    Serial.println(F("ADPS"));
  }
  else {
    Serial.print(F("ADPS PHASE #"));
    Serial.println('0' + phase);
  }
}

/* ======================================================================
Function: NewFrame 
Purpose : callback when we received a complete teleinfo frame
Input   : linked list pointer on the concerned data
Output  : - 
Comments: -
====================================================================== */
void NewFrame(ValueList * me)
{
  Serial.println(F(""));
  // Start short led blink
  digitalWrite(LEDPIN, HIGH);
  blinkLed = millis();
  blinkDelay = 50; // 50ms

  printUptime();
  Serial.println(F("FRAME -> SAME AS PREVIOUS"));
  // Display values
  Serial.println(F("DATA"));
  Serial.print(me->ts);
  Serial.print(" - ");
  Serial.print(me->name);
  Serial.print("=");
  Serial.println(me->value);
}

/* ======================================================================
Function: UpdatedFrame 
Purpose : callback when we received a complete teleinfo frame
Input   : linked list pointer on the concerned data
Output  : - 
Comments: it's called only if one data in the frame is different than
          the previous frame
====================================================================== */
void UpdatedFrame(ValueList * me)
{
  Serial.println(F(""));
  // Start long led blink
  digitalWrite(LEDPIN, HIGH);
  blinkLed = millis();
  blinkDelay = 100; // 100ms

  printUptime();
  Serial.println(F("FRAME -> UPDATED"));
}

/******************************* Loop *********************************/
void loop()
{
  static char c;
 
  // On a reçu un caractère ?
  if ( Serial10.available() )
  {
    c = Serial10.read() ;
    Serial.print(c & 0x7F);

    // Gerer
    tinfo.process(c);
  }
}

Pilotage_SGA.ino.txt