Et sinon parfois Active Power remonte bien les infos :

08:39:18.946 MQT: tele/tasmota_F5BD54/SENSOR = {"Time":"2023-10-31T08:39:18","ENERGY":{"TotalStartTime":"2023-10-21T19:40:23","Total":0.351,"Yesterday":0.001,"Today":0.001,"Period":0,"Power":90,"Current":0.000,"Load":0},"TIC":{"ADCO":"022064982940","OPTARIF":"BASE","ISOUSC":5,"BASE":353,"PTEC":"TH..","IINST":0,"IMAX":90,"PAPP":90,"HHPHC":"A","MOTDETAT":0}}

08:44:18.930 MQT: tele/tasmota_F5BD54/STATE = {"Time":"2023-10-31T08:44:18","Uptime":"1T12:48:49","UptimeSec":132529,"Heap":131,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"Berry":{"HeapUsed":3,"Objects":39},"POWER":"ON","Dimmer":64,"Color":"3956A3","HSBColor":"224,65,64","Channel":[22,34,64],"Scheme":0,"Width":1,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"garage","BSSId":"68:3F:7D:59:23:50","Channel":6,"Mode":"11n","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:03"}}
08:44:18.942 MQT: tele/tasmota_F5BD54/SENSOR = {"Time":"2023-10-31T08:44:18","ENERGY":{"TotalStartTime":"2023-10-21T19:40:23","Total":0.351,"Yesterday":0.001,"Today":0.001,"Period":0,"Power":90,"Current":0.000,"Load":0},"TIC":{"ADCO":"022064982940","OPTARIF":"BASE","ISOUSC":5,"BASE":353,"PTEC":"TH..","IINST":0,"IMAX":90,"PAPP":90,"HHPHC":"A","MOTDETAT":0}}
08:47:54.485 UFS: File '/' download

Tu n'as que ces étiquettes là donc tu ne peux rien faire, tu dois faire une demande auprès de ton fournisseur pour lui demander de passer la TIC de ton Linky en mode Standard (les boulets parfois)

{
"ADCO":"022064982940",
"OPTARIF":"BASE",
"ISOUSC":5,
"BASE":350,
"PTEC":"TH..",
"IINST":4,
"IMAX":90,
"PAPP":0,
"HHPHC":"A",
"MOTDETAT":0
}

J'ai acheté le module denky "tout fait", car mes essais avec esp32 + pcb maison opto /resistance ne fonctionnait pas de manière fiable : deux mains gauches ! Du coup j'avoue que je suis un peu frileux a l'idée de flasher le denky, de peur de tout foirer

voila quelques extrait de la console :

08:24:00.917 MQT: tele/tasmota_F5BD54/SENSOR = {"Time":"2023-10-28T08:24:00","ENERGY":{"TotalStartTime":"2023-10-21T19:40:23","Total":0.349,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"Current":3.000,"Load":60},"TIC":{"ADCO":"022064982940","OPTARIF":"BASE","ISOUSC":5,"BASE":350,"PTEC":"TH..","IINST":3,"IMAX":90,"PAPP":0,"HHPHC":"A","MOTDETAT":0}}
08:29:00.905 MQT: tele/tasmota_F5BD54/STATE = {"Time":"2023-10-28T08:29:00","Uptime":"0T13:27:47","UptimeSec":48467,"Heap":130,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"Berry":{"HeapUsed":3,"Objects":39},"POWER":"ON","Dimmer":64,"Color":"3956A3","HSBColor":"224,65,64","Channel":[22,34,64],"Scheme":0,"Width":1,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"garage","BSSId":"68:3F:7D:59:23:50","Channel":6,"Mode":"11n","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:03"}}
08:29:00.919 MQT: tele/tasmota_F5BD54/SENSOR = {"Time":"2023-10-28T08:29:00","ENERGY":{"TotalStartTime":"2023-10-21T19:40:23","Total":0.349,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"Current":3.000,"Load":60},"TIC":{"ADCO":"022064982940","OPTARIF":"BASE","ISOUSC":5,"BASE":350,"PTEC":"TH..","IINST":3,"IMAX":90,"PAPP":0,"HHPHC":"A","MOTDETAT":0}}
08:34:00.907 MQT: tele/tasmota_F5BD54/STATE = {"Time":"2023-10-28T08:34:00","Uptime":"0T13:32:47","UptimeSec":48767,"Heap":129,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"Berry":{"HeapUsed":3,"Objects":39},"POWER":"ON","Dimmer":64,"Color":"3956A3","HSBColor":"224,65,64","Channel":[22,34,64],"Scheme":0,"Width":1,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"garage","BSSId":"68:3F:7D:59:23:50","Channel":6,"Mode":"11n","RSSI":100,"Signal":-43,"LinkCount":1,"Downtime":"0T00:00:03"}}
08:34:00.919 MQT: tele/tasmota_F5BD54/SENSOR = {"Time":"2023-10-28T08:34:00","ENERGY":{"TotalStartTime":"2023-10-21T19:40:23","Total":0.349,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"Current":3.000,"Load":60},"TIC":{"ADCO":"022064982940","OPTARIF":"BASE","ISOUSC":5,"BASE":350,"PTEC":"TH..","IINST":3,"IMAX":90,"PAPP":0,"HHPHC":"A","MOTDETAT":0}}
08:39:00.910 MQT: tele/tasmota_F5BD54/STATE = {"Time":"2023-10-28T08:39:00","Uptime":"0T13:37:47","UptimeSec":49067,"Heap":130,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"Berry":{"HeapUsed":3,"Objects":39},"POWER":"ON","Dimmer":64,"Color":"3956A3","HSBColor":"224,65,64","Channel":[22,34,64],"Scheme":0,"Width":1,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"garage","BSSId":"68:3F:7D:59:23:50","Channel":6,"Mode":"11n","RSSI":100,"Signal":-43,"LinkCount":1,"Downtime":"0T00:00:03"}}
08:39:00.922 MQT: tele/tasmota_F5BD54/SENSOR = {"Time":"2023-10-28T08:39:00","ENERGY":{"TotalStartTime":"2023-10-21T19:40:23","Total":0.349,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"Current":4.000,"Load":80},"TIC":{"ADCO":"022064982940","OPTARIF":"BASE","ISOUSC":5,"BASE":350,"PTEC":"TH..","IINST":4,"IMAX":90,"PAPP":0,"HHPHC":"A","MOTDETAT":0}}
08:44:00.905 MQT: tele/tasmota_F5BD54/STATE = {"Time":"2023-10-28T08:44:00","Uptime":"0T13:42:47","UptimeSec":49367,"Heap":129,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"Berry":{"HeapUsed":3,"Objects":39},"POWER":"ON","Dimmer":64,"Color":"3956A3","HSBColor":"224,65,64","Channel":[22,34,64],"Scheme":0,"Width":1,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"garage","BSSId":"68:3F:7D:59:23:50","Channel":6,"Mode":"11n","RSSI":100,"Signal":-43,"LinkCount":1,"Downtime":"0T00:00:03"}}
08:44:00.919 MQT: tele/tasmota_F5BD54/SENSOR = {"Time":"2023-10-28T08:44:00","ENERGY":{"TotalStartTime":"2023-10-21T19:40:23","Total":0.349,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"Current":4.000,"Load":80},"TIC":{"ADCO":"022064982940","OPTARIF":"BASE","ISOUSC":5,"BASE":350,"PTEC":"TH..","IINST":4,"IMAX":90,"PAPP":0,"HHPHC":"A","MOTDETAT":0}}
08:49:00.902 MQT: tele/tasmota_F5BD54/STATE = {"Time":"2023-10-28T08:49:00","Uptime":"0T13:47:47","UptimeSec":49667,"Heap":130,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"Berry":{"HeapUsed":3,"Objects":39},"POWER":"ON","Dimmer":64,"Color":"3956A3","HSBColor":"224,65,64","Channel":[22,34,64],"Scheme":0,"Width":1,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"garage","BSSId":"68:3F:7D:59:23:50","Channel":6,"Mode":"11n","RSSI":100,"Signal":-43,"LinkCount":1,"Downtime":"0T00:00:03"}}
08:49:00.914 MQT: tele/tasmota_F5BD54/SENSOR = {"Time":"2023-10-28T08:49:00","ENERGY":{"TotalStartTime":"2023-10-21T19:40:23","Total":0.349,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"Current":4.000,"Load":80},"TIC":{"ADCO":"022064982940","OPTARIF":"BASE","ISOUSC":5,"BASE":350,"PTEC":"TH..","IINST":4,"IMAX":90,"PAPP":0,"HHPHC":"A","MOTDETAT":0}}
08:54:00.899 MQT: tele/tasmota_F5BD54/STATE = {"Time":"2023-10-28T08:54:00","Uptime":"0T13:52:47","UptimeSec":49967,"Heap":130,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"Berry":{"HeapUsed":3,"Objects":39},"POWER":"ON","Dimmer":64,"Color":"3956A3","HSBColor":"224,65,64","Channel":[22,34,64],"Scheme":0,"Width":1,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"garage","BSSId":"68:3F:7D:59:23:50","Channel":6,"Mode":"11n","RSSI":100,"Signal":-39,"LinkCount":1,"Downtime":"0T00:00:03"}}
08:54:00.911 MQT: tele/tasmota_F5BD54/SENSOR = {"Time":"2023-10-28T08:54:00","ENERGY":{"TotalStartTime":"2023-10-21T19:40:23","Total":0.349,"Yesterday":0.000,"Today":0.001,"Period":0,"Power":0,"Current":4.000,"Load":80},"TIC":{"ADCO":"022064982940","OPTARIF":"BASE","ISOUSC":5,"BASE":350,"PTEC":"TH..","IINST":4,"IMAX":90,"PAPP":0,"HHPHC":"A","MOTDETAT":0}}

il m'est néanmois arrive de voir une valeur en Watts affiche pour Active Power, mais ce n'est pas systematique.

Si tu es sur un ESP32 tu peux créer facilement un driver Teleinfo en berry pour afficher ce que tu veux

Exemple basic, avec l'index principal, irms et urms, juste testé chez moi, tu mets ça dans le fichier autoexec.be dans le filesystem

#-
 - Teleinfo driver written in Berry
 -
 - Support for Teleinfo custom values from choosen fields returned by smart meter
 - Based on TMP117-driver driver by sfromis and TomsTek (https://github.com/TomsTek/tasmota-berry-TMP117-driver)
-#

class TELEINFO: Driver

  # Global var Needed
  var east
  var irms
  var urms

  def init()
    # initialize globals

    # Don't display original sensors on WebUI, we want just our ones
    tasmota.cmd("backlog0 WebSensor0 0 ; WebSensor1 0 ; WebSensor2 0 ; WebSensor3 0")

    # create rules to trigger when TIC values updates 
  # Use Teleinfo Etiquette Names to get whatever value you need
    tasmota.add_rule("TIC#EAST", /value -> self.trigger_east(value))
    tasmota.add_rule("TIC#IRMS1", /value -> self.trigger_irms(value))
    tasmota.add_rule("TIC#URMS1", /value -> self.trigger_urms(value))
  end

  def trigger_east(index)
    self.east = index
    # DEBUG print("index:", index)
  end

  def trigger_irms(i)
    self.irms = i
    # DEBUG print("irms:", i)
  end

  def trigger_urms(u)
    self.urms = u
    # DEBUG print("urms:", u)
  end

  #- trigger a read every second -#
  def every_second()
    # DEBUG print("sensors:",tasmota.read_sensors())
  end

  #- display sensor value in the web UI -#
  def web_sensor()
    import string
    var msg = string.format(
            "{s}Consommation{m}%d Wh{e}"
            "{s}Tension RMS{m}%d V{e}"
            "{s}Intensité RMS{m}%d A{e}", 
             self.east, self.urms, self.irms )

    tasmota.web_send_decimal(msg)
  end
end

teleinfo = TELEINFO()
tasmota.add_driver(teleinfo)

et voila le résultat

Facile non ?

A++

tu pourrais mettre une trame complète de données reçues par le Denky ou afficher la console, lorsque tasmota émet une trame de télémétrie il y a toutes les données dans la console.